Sökning: "e beam"

Visar resultat 1 - 5 av 301 avhandlingar innehållade orden e beam.

  1. 1. Process integration issues for high-performance bipolar technology

    Författare :Tord E. Karlin; KTH; []
    Nyckelord :;

    Sammanfattning : The work in this thesis has been focused on processintegration issues for high-performance bipolar technologyincluding experimental work on self-aligned silicides,ion-implanted andin situdoped polysilicon emitters, strained silicongermanium for heterojunction bipolar transistors and physicalprocess and device simulation.Key issues for the self-aligned silicidation of small devicefeatures such as the influence of dopants, silicon morphologyand line width on titanium disilicide formation, phasetransformation and temperature stability, have been addressed. LÄS MER

  2. 2. From Particle-Production Cross Sections to KERMA and Absorbed Dose for the Case 96 MeV n-12C Interactions

    Författare :Bel E. Bergenwall; Ayşe Ataç; Eva Lund; Uppsala universitet; []
    Nyckelord :NATURAL SCIENCES; NATURVETENSKAP; NATURVETENSKAP; NATURAL SCIENCES; Nuclear physics; Fast neutrons; En = 96 MeV; charged-particle production; 12C n; px ; 12C n; dx ; 12C n; tx ; 12C n; 3Hex ; 12C n; ax reactions; cross sections; KERMA; microscopic measurements; absorbed dose; Kärnfysik; Nuclear physics; Kärnfysik;

    Sammanfattning : Neutron-carbon interactions have been studied with a focus on charged-particle production of relevance to radiation protection and medical applications, such as cancer therapy. The measurements have been performed using the particle-detection setup, MEDLEY, and the 96 MeV neutron beam at the The Svedberg Laboratory in Uppsala. LÄS MER

  3. 3. On the deformation behavior and cracking of ductile iron; effect of microstructure

    Författare :Keivan Amiri Kasvayee; Anders E.W. Jarfors; Jens Bergström; Högskolan i Jönköping; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Spherical graphite iron; component casting; high silicon ductile iron; digital image correlation DIC ; in-situ tensile testing; in-situ cyclic testing; DIC pattern generation; pit etching; micro-scale deformation; micro-crack; finite element analysis FEA ; focused ion beam FIB milling; segjärn; komponentgjutning; högkisellegerat segjärn; digital image correlation DIC ; insitu dragprovning; in-situ cyklisk provning; DIC-mönstergenerering; grop-etsning; mikroskalig deformation; mikrosprickor; finite element analys FEA ; fokuserad jonstråle FIB avverkning;

    Sammanfattning : This thesis focuses on the effect of microstructural variation on the mechanical properties and deformation behavior of ductile iron. To research and determine these effects, two grades of ductile iron, (i) GJS-500-7 and (ii) high silicon GJS-500-14, were cast in a geometry containing several plates with different section thicknesses in order to produce microstructural variation. LÄS MER

  4. 4. Defect Induced Room-Temperature Ferromagnetism in ZnO and MgO Thin FIlms and Device Development

    Författare :Mukes Kapilashrami; Lyuba Belova; E Dan Dahlberg; KTH; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; Room-temperature ferromagnetism; intrinsic defects; un-balanced balanced magnetron sputtering; magnetic anisotropy and photoconductivity; Materials science; Teknisk materialvetenskap;

    Sammanfattning : This thesis presents the discovery of defect induced room-temperature ferromagnetism in industrially important ZnO and MgO thin films, and establishes from a systematic study, in both ZnO and MgO films, the unique phenomenon of the sequences of transitions from ferromagnetism to para-, and eventually the well known diamagnetism of the bulk as a function of film thickness. Highly oriented and high quality dense thin films of ZnO and MgO have been deposited by reactive (balanced) magnetron sputtering under different ambience conditions and deposition temperatures. LÄS MER

  5. 5. The influence of microstructure on the crack initiation and propagation in Al-Si casting alloys

    Författare :Toni Bogdanoff; Salem Seifeddine; Ehsan Ghassemali; Anders E.W. Jarfors; Johan Moverare; Jönköping University; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Aluminum-Silicon alloys; scanning electron microscopy; material characterization; fatigue performance; digital image correlation;

    Sammanfattning : For reducing the CO2 footprint in many industrial fields, the goal is to produce lighter components. The aluminium-silicon (Al-Si) cast alloys are promising candidates to fulfill these goals with a high weight-to-strength ratio, good corrosion properties, excellent castability, and recyclable material. LÄS MER