Sökning: "component casting"
Visar resultat 1 - 5 av 40 avhandlingar innehållade orden component casting.
1. Wheat Gluten -Based Materials and Composites: Extrusion, Casting and Antimicrobial Properties
Sammanfattning : The use of bio-based polymers as packaging materials has gained much attention due to increasing environmental concerns regarding non-biodegradable petroleum-derived plastics. Wheat gluten (WG) is a valuable renewable resource for the production of bio-based materials because of its low price, biodegradability, good film-forming properties and good gas barrier properties under dry conditions. LÄS MER
2. Hardening Distortions of Serial Produced Gears
Sammanfattning : Hardening distortions are unwanted changes in shape and dimension that arise during hardening of steel components. Uncontrolled distortions induce random errors to the manufacturing process, and have a strong negative impact on manufacturing costs. LÄS MER
3. On the deformation behavior and cracking of ductile iron; effect of microstructure
Sammanfattning : This thesis focuses on the effect of microstructural variation on the mechanical properties and deformation behavior of ductile iron. To research and determine these effects, two grades of ductile iron, (i) GJS-500-7 and (ii) high silicon GJS-500-14, were cast in a geometry containing several plates with different section thicknesses in order to produce microstructural variation. LÄS MER
4. Microstructure-based Mechanical Behaviour in Structural Analyses of Cast Components
Sammanfattning : In the process of developing cast iron and cast aluminium components, the co-operation between product development and production is important. On the engineering level, this co-operation is limited already in the product development phase e.g. by the lack of established methods to consider the mechanical behaviour of the completed component. LÄS MER
5. Simulation of Microstructure-based Mechanical Behaviour of Cast Components
Sammanfattning : In the process of developing cast iron and cast aluminium components, a high level of co-operation between product development and production is of great importance. From an engineering standpoint, this co-operation is limited early in the product development phase by e.g. LÄS MER