Sökning: "e beam"

Visar resultat 11 - 15 av 333 avhandlingar innehållade orden e beam.

  1. 11. Biomechanical Analysis of Stress and Stiffness of New Load-Bearing Implants

    Författare :Jinxing Huo; E. Kristofer Gamstedt; Benedikt Helgason; Uppsala universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Engineering science with specialization in Applied Mechanics; Teknisk fysik med inriktning mot tillämpad mekanik;

    Sammanfattning : Medical implants are essential products for saving lives and improving life quality. Nowadays, the demand for implants, especially biocompatible and personalized ones, is increasing rapidly to deal with factors like congenital malformations, aging, and increasing prevalence of cancer. LÄS MER

  3. 12. Investigation and calibration of pulsed time-of-flight terrestrial laser scanners

    Författare :Yuriy Reshetyuk; Lars E. Sjöberg; Stig-Göran Mårtensson; KTH; []
    Nyckelord :terrestrial laser scanning; error sources; calibration; coordinate precision accuracy;

    Sammanfattning : This thesis has two aims. The first one is the investigation and analysis of the errors occurring in the measurements with pulsed time-of-flight (TOF) terrestrial laser scanners (TLS). A good understanding of the error sources and the relationships between them is necessary to secure the data accuracy. LÄS MER

  4. 13. Applications of Ion Beam Methods in Silicide/Si and Silicide/GaAs Nanometre Structures

    Författare :Yanwen Zhang; Kärnfysik; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; Phase formation; Nanometre structures; silicide; detection efficiency; Ion Beam Analysis; Ion Beam Synthesis; Time-of-Flight Energy Elastic Recoil Detection ToF-E ERD ; implantation; Fysicumarkivet A:1998:Zhang; Kärnfysik; Nuclear physics; Detla E-E ERD;

    Sammanfattning : Ion beam methods are used to analyse material (Ion Beam Analysis, IBA) and to modify the target (Ion Beam Modification of Materials, IBMM). In this thesis, ion beams have been used in various IBA techniques to investigate the surface nanometre structures, and also in an ion beam synthesis (IBS) technique to form thin films and to modify material properties. LÄS MER

  5. 14. Beam Modelling for Treatment Planning of Scanned Proton Beams

    Författare :Peter Kimstrand; Bengt Glimelius; Erik Traneus; Nina Tilly; Anders Ahnesjö; Thomas Bortfeld; Uppsala universitet; []
    Nyckelord :Radiation sciences; proton therapy; treatment planning; beam modelling; dose calculation; Monte Carlo; Strålningsvetenskap;

    Sammanfattning : Scanned proton beams offer the possibility to take full advantage of the dose deposition properties of proton beams, i.e. the limited range and sharp peak at the end of the range, the Bragg peak. LÄS MER

  7. 15. Ion beam etching of InP based materials

    Författare :Carl-Fredrik Carlström; KTH; []
    Nyckelord :InP; dry etching; ion beam etching; RIBE; CAIBE; hydrocarbon chemistry; trimethylamine; As P exchange reaction; morphology; low damage; AFM; SCM; annealing;

    Sammanfattning : Dry etching is an important technique for pattern transferin fabrication of most opto-electronic devices, since it canprovide good control of both structure size and shape even on asub-micron scale. Unfortunately, this process step may causedamage to the material which is detrimental to deviceperformance. LÄS MER