Sökning: "finite element analysis FEA"
Visar resultat 1 - 5 av 47 avhandlingar innehållade orden finite element analysis FEA.
1. Finite Element Analysis and Design of Experiments in Engineering Design
Sammanfattning : Projects with the objective of introducing Finite Element Analysis (FEA) into the early phases of the design process have previously been carried out at the Department of Machine Design, see e.g. the Doctoral thesis by Burman [13]. These works clearly highlight the usefulness of introducing design analysis early in the design process. LÄS MER
2. From CAD to FEA : A design automation perspective
Sammanfattning : CAD-models of parts produced by injection moulding or die-casting are often complex making the task of automated geometrical idealisation for finite element analysis difficult. Conventional tools for geometric idealisation are not ideal for the task, as will be shown in the thesis. LÄS MER
3. Thermo-mechanical Assessment of Reactor Pressure Vessels of Light Water Reactors During Severe Accidents
Sammanfattning : The reactor pressure vessel (RPV) is one of the crucial safety barriers designed to isolate the reactor core, safeguarding against potential radioactive releases into the environment during a severe accident. The assessment of RPV behaviour and its failure is necessary to predict the characteristics of melt release into the reactor pit and succeeding ex-vessel accident progression. LÄS MER
4. Template-Based Design Analysis : An Alternative Approach for the Engineering Designer to Perform Computer-Based Design Analysis
Sammanfattning : The current trend in industry to encourage engineering designers to take an active part in the analysis of their own design solutions is apparent in many companies today, domestically as well as abroad.From a research project with the objective to develop a computer-based design system for the design of lightweight grippers, one of the major difficulties was to overcome the system users’ lack of knowledge and experience in the design of lightweight structures and Computer-Based Design Analysis (CBDA). LÄS MER
5. On the deformation behavior and cracking of ductile iron; effect of microstructure
Sammanfattning : This thesis focuses on the effect of microstructural variation on the mechanical properties and deformation behavior of ductile iron. To research and determine these effects, two grades of ductile iron, (i) GJS-500-7 and (ii) high silicon GJS-500-14, were cast in a geometry containing several plates with different section thicknesses in order to produce microstructural variation. LÄS MER