Sökning: "mätresultat"
Visar resultat 6 - 10 av 30 avhandlingar innehållade ordet mätresultat.
6. Persistent Organic Pollutants and the Environment : A Chemometric Approach to the Study of Halogenated Aromatics
Sammanfattning : Concern is growing about the environmental and health effects of persistent organic pollutants (POPs), many of which are halogenated aromatic compunds. The research reported in this thesis focuses on factors determining their behaviour and release into the environment. LÄS MER
7. Advances in time–domain induced polarisation tomography : Data acquisition, processing and modelling
Sammanfattning : What would you find below your feet – how do you find out? Perhaps you could look at a geological map, drill, or dig? That could work, but sometimes the maps are not detailed enough, and digging everywhere to find out is impractical. Imagine if you could develop a method that allows you to see straight through the ground, as x–rays through the body! To some extent, such methods already exist; you can for example send electric current into the ground that tells you what lies beneath when it returns. LÄS MER
8. Development of a 2D Temperature Measurement Technique for Combustion Diagnostics using 2-Line Atomic Fluorescence
Sammanfattning : The present thesis is concerned with the development and application of a novel planar laser-induced fluorescence (PLIF) technique for temperature measurements in a variety of combusting flows. Accurate measurement of temperature is an essential task in combustion diagnostics, since temperature is one of the most fundamental quantities for the characterization of combustion processes. LÄS MER
9. Simulation of robot paths and heat effects in welding
Sammanfattning : The objective of this thesis is to develop a simulation tool and a method by which robot trajectories, temperature histories, residual stresses and distortion can be analysed and optimized off-line. This was performed by integrating robot simulation software with finite element analysis software. LÄS MER
10. Characterization of an Electrical Sensor for Combustion Diagnostics
Sammanfattning : The ionization sensor is an electrical probe for diagnostics in internal combustion engines. The combustion process affects the electrical properties of the gas in the cylinder. Thus the sensor signal contains copious information about the conditions in the combustion chamber. LÄS MER