Sökning: "Welding"

Visar resultat 1 - 5 av 237 avhandlingar innehållade ordet Welding.

  1. 1. Modeling and simulation for welding automation

    Detta är en avhandling från Göteborg : Chalmers

    Författare :Fredrik Sikström; Högskolan Väst.; [2010]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TECHNOLOGY Materials science Other processing assembly; TEKNIKVETENSKAP Teknisk materialvetenskap Övrig bearbetning sammanfogning; Manufacturing and materials engineering; Produktions- och materialteknik; welding automation; fixturing; finite element modeling; heat conduction; model order reduction; sensors; welding simulation; controller design; Welding automation; Heat conduction; Model order reduction; Finite element modeling; Controller design; Welding simulation; Sensors; Fixturing;

    Sammanfattning : Fusion welding of metals is an important manufacturing process. This thesis presents a modeling and simulation strategy for welding automation. It deals with the problem of mitigating discontinuities caused by this process, and focus is on a high joint performance and structural integrity. LÄS MER

  2. 2. Challenges in Resistance Welding of Ultra High Strength Steels

    Detta är en avhandling från Stockholm : KTH Royal Institute of Technology

    Författare :Erik Tolf; KTH.; [2015]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Resistance welding; spot welding; surface cracks; nut welding; UHSS; projection welding; Materials Science and Engineering; Teknisk materialvetenskap;

    Sammanfattning : Increasing the use of Ultra High Strength Steels (UHSS) in vehicle bodystructures is important for reducing weight and cutting CO2 emissions. This thesis investigates challenges in resistance welding that can be a barrier to implementing UHSS as a replacement for low strength steels in vehicle structures. LÄS MER

  3. 3. Laser welding energy redistribution and weld geometry

    Detta är en avhandling från Luleå : Luleå tekniska universitet

    Författare :Conny Lampa; [1997]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Material Mechanics; Materialmekanik;

    Sammanfattning : Over the past few years laser welding has developed into a process which has a wide range of application over a number of industries. Industrial growth in this area has been stimulated by improvements in production rates and quality but technologically the process is still not fully understood. LÄS MER

  4. 4. Conduction laser welding modelling of melt pool with free surface deformation

    Detta är en avhandling från Trollhättan : University West

    Författare :Josefine Svenungsson; Högskolan Väst.; [2019]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Conduction laser welding; numerical modelling; Computational Fluid Dynamics; OpenFOAM; free surface deformation; melt pool; Production Technology; Produktionsteknik; Manufacturing and materials engineering; Produktions- och materialteknik;

    Sammanfattning : Laser welding is commonly used in the automotive-, steel- and aerospace industry. It is a highly non-linear and coupled process where the weld geometry is strongly affected by the flow pattern in the melt pool. Experimental observations are challenging since the melt pool and melt flow below the surface are not yet accessible during welding. LÄS MER

  5. 5. Modelling of Electric Arc Welding arc-electrode coupling

    Detta är en avhandling från Gothenburg : Chalmers University of Technology

    Författare :Alireza Javidi Shirvan; Högskolan Väst.; [2013]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Manufacturing and materials engineering; Produktions- och materialteknik; electric welding; arc welding simulation; electrode; plasma; cathode layer; sheath; arc discharge;

    Sammanfattning : Arc welding still requires deeper process understanding and more accurateprediction of the heat transferred to the base metal. This can be provided by CFD modelling.Most works done to model arc discharge using CFD consider the arc corealone. LÄS MER