Sökning: "Particle formation"

Visar resultat 1 - 5 av 485 avhandlingar innehållade orden Particle formation.

  1. 1. Spray-Dried Powders for Inhalation : Particle Formation and Formulation Concepts

    Författare :Jessica Elversson; Göran Alderborn; Anna Millqvist-Fureby; Lars Hovgaard; Uppsala universitet; []
    Nyckelord :MEDICAL AND HEALTH SCIENCES; MEDICIN OCH HÄLSOVETENSKAP; MEDICIN OCH HÄLSOVETENSKAP; MEDICAL AND HEALTH SCIENCES; Pharmaceutics; Spray drying; Particle formation; Density; Protein formulation; Encapsulation; Coating; Competitive adsorption; Polymer; ESCA; AFM; FTIR; Galenisk farmaci; Pharmaceutics; Galenisk farmaci;

    Sammanfattning : Spray drying is a method with a high potential in the preparation of protein particles suitable for pulmonary delivery. However, surface induced denaturation of bio-molecules during atomization and subsequent drying can be substantial and it is therefore important to develop new formulation concept for concurrent encapsulation and stabilization of proteins during spray drying. LÄS MER

  3. 2. Fuel conversion and ash formation interactions : a thermochemical study on lignocellulosic biomass

    Författare :Anna Strandberg; Markus Broström; Rainer Backman; Christoffer Boman; Maria Zevenhoven; Umeå universitet; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; NATURAL SCIENCES; NATURVETENSKAP; NATURVETENSKAP; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; NATURAL SCIENCES; ENGINEERING AND TECHNOLOGY; ENGINEERING AND TECHNOLOGY; Char conversion; pyrolysis; devolatilization; ash transformation; biomass; fuel characterization; fuel composition; ash composition; silicate formation; carbonate formation; thermogravimetric analysis; micro-tomography;

    Sammanfattning : Biomass is considered to be CO2 neutral, and to be able to reduce the dependency on fossil fuels the need for expanded and sustainable biomass feedstock is increasing. Ash-related problems are some of the most important aspects of this increasing use of new biomass assortments in thermal energy conversion systems. LÄS MER

  4. 3. The relationship between fly ash chemistry and the thermal formation of polychlorinated pollutants during waste incineration

    Författare :Duong Ngoc Chau Phan; Stellan Marklund; Bogdan Dlugogorski; Umeå universitet; []
    Nyckelord :NATURAL SCIENCES; NATURVETENSKAP; Incinerations; dioxins; PCDD Fs; PCBs; PCNs; flue gas; fly ash; sampling; particle characterization; XPS; XRD; SEM EDX; formation; chlorination; PCA; OPLS; OPLS-DA;

    Sammanfattning : The thermal formation of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), biphenyls (PCBs), and naphthalenes (PCNs) is a major problem in waste incineration. Ideally, rather than relying on air cleaning systems and treatment techniques, their formation should be minimized or, if possible eliminated. LÄS MER

  5. 4. Fine particle emissions and slag formation in fixed-bed biomass combustion : aspects of fuel engineering

    Författare :Jonathan Fagerström; Christoffer Boman; Dan Boström; Marcus Öhman; Bengt-Johan Skrifvars; Umeå universitet; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; ENGINEERING AND TECHNOLOGY; Renewable energy; biomass; thermochemical fuel conversion; combustion; fine particle emissions; slag formation; fixed-bed; ash chemistry; fuel engineering; release;

    Sammanfattning : There is a consensus worldwide that the share of renewable energy sources should be increased to mitigate climate change. The strive to increase the renewable energy fraction can partly be met by an increased utilization of different biomass feedstocks. LÄS MER

  7. 5. Particle Coating in a Wurster Type Bed

    Författare :Stina Karlsson; Chalmers University of Technology; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; MEDICIN OCH HÄLSOVETENSKAP; ENGINEERING AND TECHNOLOGY; MEDICAL AND HEALTH SCIENCES; Drying; Particle; Tracking technique; Spouted bed; Fluidisation; Multiphase flow; CFD; Trajectory; Coating; Wurster;

    Sammanfattning : The Wurster bed process is frequently used for film coating. In the Wurster bed, particles circulate in the equipment and are sprayed with a liquid which forms a coating when dry. The procedure is repeated until the desired characteristics of the coating layer are obtained. LÄS MER