Sökning: "linear elastic fracture mechanics"

Visar resultat 16 - 20 av 57 avhandlingar innehållade orden linear elastic fracture mechanics.

1. 16. Fracture mechanics studies of non-yielding materials like concrete : modelling of tensile fracture and applied strength analyses

   Författare :Per-Johan Gustafsson; Institutioner vid LTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; cracking; corners; test-specimens; strength; tension; fracture mechanics; strain localization; size-effect; flexural strength; LEFM; fictitious crack model; Weibull; FEM; pipes; shear strength; concrete; diagonal tension;

   Sammanfattning : Fracture mechanics studies of non-yielding materials are presented. The studies are based on theoretical models for the macroscopical mechanical behaviour of materials during tensile stress induced fracture. A number of applied numercal analysis are indicated. LÄS MER

3. 17. Behaviour of fracture process zones in concrete influenced by simultaneously applied normal and shear displacements

   Författare :Manouchehr Hassanzadeh; Avdelningen för Byggnadsmaterial; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; softening; mixed mode; fictitious crack model; concrete; deformationer; betong; brottmekanik; hållfasthet; brotthållfasthet; spänningar; skjuvspänningar; sprickor; beräkningsmodeller; brottenergi; teori; laboratorieförsök; interlock; crack path; diagonal crack; microcracking; instability; fracture energy; fracture mechanics; shear; tension; process zone;

   Sammanfattning : The thesis deals with the determination of the post peak behaviour of concrete in pure tension, and combined tension (compression) and shear. A test arrangement has been developed in order to determine the post peak behaviour of concrete expressed as stress - displacement curves. LÄS MER

4. 18. Modelling and experimental evaluation of non-linear fatigue crack propagation in a ductile superalloy

   Författare :Daniel Ewest; Per Almroth; Kjell Simonsson; Björn Sjödin; Daniel Leidermark; Sören Sjöström; Linköpings universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

   Sammanfattning : Fatigue life evaluation is an important part in the design process of an industrial gas turbine. The fatigue life can be divided into crack initiation and crack propagation, and not to address the crack propagation part usually yields a non-conservative and overcomplicated design. LÄS MER

5. 19. On Cohesive Modelling of Carbon/Epoxy Composites : Delamination and Fibre Compressive Failure

   Författare :Daniel Svensson; Ulf Stigh; Bent Sørensen; Högskolan i Skövde; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; CFRP; Cohesive zone model; J-integral; LEFM; Delamination; Compressive failure; Technology; Teknik; Mechanics of Materials; Materialmekanik;

   Sammanfattning : Carbon Fibre Reinforced Polymers are widely used in engineering applications where weight saving and high mechanical performance are a key factors. However, an inheren tweakness of laminated CFRP:s is there relatively low resistance to delamination. Therst part of this thesis is devoted to extract cohesive laws associated with delamination. LÄS MER

7. 20. Mechanical Behaviour of Single-Layer Adhesive Joints : an integrated approach

   Författare :Li Högberg; Högskolan i Skövde; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; adhesive layer; beam adhesive layer model; energy release rate; fracture; integrated; Engineering mechanics; Teknisk mekanik; Teknik; Technology;

   Sammanfattning : Innovative products that are competitive on the market are likely to employ newtypes of materials and unusual geometries. A method that can assemble dissimilarmaterials and irregular geometries cost-effectively and at the same time offera joint that is light in weight and imperceptible, is optimal. LÄS MER