Sökning: "Ulf Stigh"

Visar resultat 1 - 5 av 7 avhandlingar innehållade orden Ulf Stigh.

  1. 1. Experimental methods to determine model parameters for failure modes of CFRP

    Författare :Daniel Svensson; Ulf Stigh; Svante Alfredsson; Högskolan i Skövde; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; composite; delamination; compressive failure; energy release rate; cohesive modelling; Teknik; Technology;

    Sammanfattning : The focus of this thesis is to develop methods to predict the damage response of Carbon Fibre Reinforced Polymers (CFRP). In the pursuit of reducing the manufacturing cost and weight of CFRP components, it is crucial to enable modelling of the non-linear response associated with various failure modes. LÄS MER

  3. 2. The modified iosipescu shear test for measuring strengths and constitutive behavior of composites

    Författare :Niklas Melin; Jonas Neumeister; Ulf Stigh; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Other engineering mechanics; Övrig teknisk mekanik;

    Sammanfattning : .... LÄS MER

  4. 3. Residual Stresses and Strains in Cross-linked Polyethylene Power Cable Insulation

    Författare :Lorant Olasz; Peter Gudmundson; Ulf Stigh; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Other engineering mechanics; Övrig teknisk mekanik;

    Sammanfattning : The subject of this thesis is modeling of the manufacturing process of high voltage power cables with the aim of predicting residual stresses and strains in the cable insulation. The studied material is cross-linked polyethylene (XLPE), which at room temperature is a semi-crystalline viscoelastic solid. LÄS MER

  5. 4. Meso-Mechanical Modeling and Analysis of Adhesive Layers

    Författare :Kent Salomonsson; Ulf Stigh; Per Ståhle; Högskolan i Skövde; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Adhesive layer; Meso-mechanical; Representative Volume Element; Large curvatures; Interphase elements; Evolution algorithm; Engineering mechanics; Teknisk mekanik; Technology; Teknik;

    Sammanfattning : This thesis is concerned with the modeling, simulation and analysis of adhesive layers. By use of an in situ scanning electron microscopy study it is found that the adhesive studied in the present thesis has a very complex structure with two different compounds, a mineral and an epoxy/thermoplastic blend. LÄS MER

  7. 5. Computational Models of Adhesively Bonded Joints

    Författare :Peter Schmidt; Anders Klarbring; Ulf Stigh; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; adhesively bonded joint; asymptotic expansion; finite element; damage mechanics; Engineering mechanics; Teknisk mekanik;

    Sammanfattning : Simulations using the Finite Element Method (FEM) play an increasingly important role in the design process of joints and fasteners in the aerospace industry. In order to utilize the potential of such adhesive bonding, there is an increasing need for effective and accurate computational methods. LÄS MER