Sökning: "Materialmekanik"

Visar resultat 1 - 5 av 41 avhandlingar innehållade ordet Materialmekanik.

  1. 1. Non-local models in manufacturing simulations

    Författare :Olufunminiyi Abiri; Miguel Vaz; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Material Mechanics; Materialmekanik;

    Sammanfattning : Ductile fracture presents challenges with respect to material modelling andnumerical simulations of localization. The strain and damage localization maybe unwanted as it indicates a failure in the process or, as in the case ofmachining and cutting, a wanted phenomenon to be controlled. LÄS MER

  3. 2. Simplifications of non-local damage models

    Författare :Olufunminiyi Abiri; Matti Ristinmaa; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Material Mechanics; Materialmekanik;

    Sammanfattning : Ductile fracture presents challenges with respect to material modelling and numerical simulations of localization. The strain and damage localization may be unwanted as it indicates a failure in the process or, as in the case of machining and cutting, a wanted phenomenon to be controlled. LÄS MER

  4. 3. Modeling of Cold Pilgering of Tubes

    Författare :Yağız Azizoğlu; Lars-Erik Lindrgren; Denis Sornin; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cold pilgering; finite element method; tube forming; tool elasticity; roll flattening; Material Mechanics; Materialmekanik; Steel Forming and Surface Engineering;

    Sammanfattning : Cold pilgering is a challenging tube forming process in terms of modeling due to the complexity in kinematic of tools, friction condition and material behavior. The process development has mostly been based on simple formulas and costly full-scale tryouts. LÄS MER

  5. 4. Mechanism-based flow stress model for Ti-6Al-4V : applicable for simulation of additive manufacturing and machining

    Författare :Bijish Babu; Lars-Erik Lindgren; Jean-Philippe Ponthot; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Material modeling; Ti-6Al-4V; dislocation density; vacancy concentration; additive manufacturing; hot forming; heat treatment; Material Mechanics; Materialmekanik;

    Sammanfattning : Ti-6Al-4V has remarkable properties such as high specific mechanical properties (viz. stiffness, strength, toughness, fatigue resistance), corrosion resistance, biocompatibility etc. These properties make it attractive for applications in aerospace, chemical industry, energy production, surgical implants, etc. LÄS MER

  7. 5. Physically based model for plasticity and creep of Ti-6Al-4V

    Författare :Bijish Babu; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Material Mechanics; Materialmekanik;

    Sammanfattning : Albeit Ti-6Al-4V has numerous salient properties, its usage for certain applications is limited due to the challenges faced during manufacturing. Understanding the dominant deformation mechanisms and numerically modelling the process is the key to overcome this hurdle. This work investigates plastic deformation of the alloy at strain rates from 0. LÄS MER