Sökning: "SEM analysis"

Visar resultat 16 - 20 av 285 avhandlingar innehållade orden SEM analysis.

  1. 16. Atmospheric corrosion of zinc-aluminum and copper-based alloys in chloride-rich environments : Microstructure, corrosion initiation, patina evolution and metal release

    Författare :Xian Zhang; Inger Odnevall Wallinder; Christofer Leygraf; Manuel Morcillo; KTH; []
    Nyckelord :atmospheric corrosion; chloride deposition; Zn-Al alloy coatings on steel microstructure; Cu sheet and Cu alloys; microstructure; corrosion initiation; corrosion product evolution; metal release; SEM; IRAS; CRM.; Kemi; Chemistry;

    Sammanfattning : Fundamental understanding of atmospheric corrosion mechanisms requires an in-depth understanding on the dynamic interaction between corrosive constituents and metal/alloy surfaces. This doctoral study comprises field and laboratory investigations that assess atmospheric corrosion and metal release processes for two different groups of alloys exposed in chloride-rich environments. LÄS MER

  3. 17. Geochemical and mineralogical laboratory methods in waste rock drainage quality prediction

    Författare :Teemu Karlsson; Lena Alakangas; Päivi Kauppila; Andrew Barnes; Luleå tekniska universitet; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; Extractive waste characterisation; drainage water; ARD; NRD; ABA test; NAG test; SEM; Applied Geochemistry; Tillämpad geokemi;

    Sammanfattning : Harmful substances containing acid or neutral rock drainages (ARD and NRD) are a major challenge related to the management of extractive industry wastes. This issue is particularly related to deposits containing sulphide minerals, which are prone to oxidization under the influence of atmospheric oxygen and water. LÄS MER

  4. 18. Development of Composition Gradients in Cemented Carbides

    Författare :Robert Frykholm; Chalmers tekniska högskola; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; EPMA; DICTRA; functionally graded materials; gradient sintering; diffusion; APFIM; thermodynamic modelling; SEM; surface zones;

    Sammanfattning : This thesis concerns the formation of tough surface zones, depleted of cubic carbo-nitrides, in cemented carbides. Several materials with varied phase compositions, binder phase volume fraction, and carbon content have been investigated. LÄS MER

  5. 19. Nanocomposite films for corrosion protection

    Författare :Majid Sababi; Jinshan Pan; J.M.C. (Arjan) Mol; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; corrosion protection; nanocomposite; coating; tool alloy; layer‐by‐layer; polarization; passivity; nanomechanical; topography; Mefp‐ 1; ceria nanoparticle; PAni; UV‐cure; AFM; Peak Force QNM; EIS; SEM; CRM; QCM‐D; ATR‐FTIR;

    Sammanfattning : This thesis describes technical and scientific aspects of new types of composite films/coatings for corrosion protection of carbon steel, composite films with nanometer thickness consisting of mussel adhesive protein (Mefp‐1) and ceria nanoparticles, and polymeric composite coatings with micrometre thickness consisting of conducting polymer and ceria nanoparticles in a UV‐curing polyester acrylate (PEA) resin.The influence of microstructure on corrosion behaviour was studied for a Fe‐Cr‐V‐N alloy containing micro‐sized nitrides with different chemical composition spread in martensitic alloy matrix. LÄS MER

  7. 20. Surface Composition and Microstructure Control during Pressureless Forming and Sintering of Ferrous Powder Metallurgy Materials

    Författare :Sílvia Magalhães; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; metal injection moulding MIM ; surface reactions; SEM; MS; supersolidus liquid phase sintering; TGA; high speed steel HSS ; liquid phase sintering; starch consolidation SC ; XPS; ferrous powder; powder metallurgy PM ; degassing;

    Sammanfattning : This study addresses key issues related to different stages of ferrous PM materials processing. Several analytical tools are applied in the study of surface composition and microstructure control in the processing of ferrous powder including forming, degassing and sintering stages. LÄS MER