Sökning: "nanocomposite"

Visar resultat 1 - 5 av 127 avhandlingar innehållade ordet nanocomposite.

  1. 1. Nanocomposite films for corrosion protection

    Författare :Majid Sababi; Jinshan Pan; J.M.C. (Arjan) Mol; KTH; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; corrosion protection; nanocomposite; coating; tool alloy; layer‐by‐layer; polarization; passivity; nanomechanical; topography; Mefp‐ 1; ceria nanoparticle; PAni; UV‐cure; AFM; Peak Force QNM; EIS; SEM; CRM; QCM‐D; ATR‐FTIR;

    Sammanfattning : This thesis describes technical and scientific aspects of new types of composite films/coatings for corrosion protection of carbon steel, composite films with nanometer thickness consisting of mussel adhesive protein (Mefp‐1) and ceria nanoparticles, and polymeric composite coatings with micrometre thickness consisting of conducting polymer and ceria nanoparticles in a UV‐curing polyester acrylate (PEA) resin.The influence of microstructure on corrosion behaviour was studied for a Fe‐Cr‐V‐N alloy containing micro‐sized nitrides with different chemical composition spread in martensitic alloy matrix. LÄS MER

  2. 2. Design of carbide-based nanocomposite coatings

    Författare :Erik Lewin; Ulf Jansson; Jörg Patscheider; Uppsala universitet; []
    Nyckelord :NATURAL SCIENCES; NATURVETENSKAP; NATURAL SCIENCES; NATURVETENSKAP; chemistry; thin film; dc magnetron sputtering; carbide; nanocomposite; PVD; solid solution; Chemistry; Kemi; Inorganic chemistry; Oorganisk kemi; Inorganic Chemistry; Oorganisk kemi;

    Sammanfattning : In this thesis research on synthesis, microstructure and properties of carbide-based coatings is reported. These coatings are electrically conducting, and can be tailored for high hardness, low friction and wear, along with load-adaptive behaviour. Tailoring these properties is achieved by controlling the relative phase content of the material. LÄS MER

  3. 3. Bio-inspired polysaccharide nanocomposites and foams

    Författare :Anna Svagan; Lars Berglund; Mats Stading; KTH; []
    Nyckelord :MEDICAL AND HEALTH SCIENCES; MEDICIN OCH HÄLSOVETENSKAP; MEDICIN OCH HÄLSOVETENSKAP; MEDICAL AND HEALTH SCIENCES; cellulose; starch; microfibrillated cellulose; biomimetic; nanocomposite; nanocomposite foam; mechanical properties; Biomaterials; Biomaterial;

    Sammanfattning : Today, the majority of materials used for single-use packaging are petroleum-based synthetic polymers. With increased concern about the environmental protection, efforts have been made to develop alternative biodegradable materials from renewable resources. Starch offers an attractive alternative since it is of low cost and abundant. LÄS MER

  4. 4. Solution-Chemical Synthesis of Cobalt and Iron:Zinc Oxide Nanocomposite Films

    Författare :Ulrika Lagerqvist; Annika Pohl; Peter Svedlindh; Mikael Ottosson; Theodor Schneller; Uppsala universitet; []
    Nyckelord :NATURAL SCIENCES; NATURVETENSKAP; NATURVETENSKAP; NATURAL SCIENCES; Fe:Zn oxide; Co-CoO; Solution-chemical synthesis; Heat treatment parameters; Nanocomposite; Film; Multilayer; Phase ratio; Phase distribution; Exchange bias; Magnetism; Photocatalysis; Chemistry with specialization in Inorganic Chemistry; Kemi med inriktning mot oorganisk kemi;

    Sammanfattning : The potentially most important challenges today are related to energy and the environment. New materials and methods are needed in order to, in a sustainable way, convert and store energy, reduce pollution, and clean the air and water from contaminations. LÄS MER

  5. 5. Biodegradable Blends and Nanocomposite Films with Amylopectin, Poly(lactic acid) and Chitosan Matrices

    Författare :David Nordqvist; Mikael S. Hedenqvist; Mats Stading; KTH; []
    Nyckelord :NATURAL SCIENCES; NATURVETENSKAP; NATURVETENSKAP; NATURAL SCIENCES; amylopectin; chitosan; microfibrillated cellulose; nanocomposite; montmorillonite; coupling agent; amylopektin; kitosan; mikrofibrillär cellulose; nanokomposit; montmorillonit; kompatibilisator; Polymer chemistry; Polymerkemi;

    Sammanfattning : Användningan av engångsförpackningar har ökat kraftigt de senaste åren. Den absolut största delen av dessa förpackningar tillverkars av oljebaserade plaster såsom polyetylen (PE) och polypropylen (PP). Dessa har även en oerhört lång nedbrytningstid, vilket gör det viktigt att finna mer miljövänliga alternativ. LÄS MER