Sökning: "SEM analysis"
Visar resultat 21 - 25 av 284 avhandlingar innehållade orden SEM analysis.
21. Fundamental studies on the high temperature corrosion mechanisms of a 22Cr austenitic stainless steel in environments related to oxy-fuel combustion
Sammanfattning : This thesis concern the high temperature corrosion mechanisms of stainless steels, with focus on a 22 wt.% Cr FeNiCr alloy (Sanicro 25), in environments related to oxy-fuel combustion, which is a promising technology that can provide enhanced CO2 recovery and sequestration from power plants by using post-combustion capture. LÄS MER
22. Chemical Processes at the Water-Manganite (γ-MnOOH) Interface
Sammanfattning : The chemistry of mineral surfaces is of great importance in many different areas including natural processes occurring in oceans, rivers, lakes and soils. Manganese (hydr)oxides are one important group to these natural processes, and the thermodynamically most stable trivalent manganese (hydr)oxide, manganit (γ-MnOOH), is studied in this thesis. LÄS MER
23. Phosphorus recovery from sewage sludge fluidized bed gasification processes
Sammanfattning : One of the most sustainable pathways of sewage sludge treatment in recent years has been thermal conversion. The benefits of thermal treatment of sewage sludge are the recovery of energy or valuable chemical products, the destruction of harmful organic compounds, the separation of heavy metals from the P-rich coarse ash fraction, and the decreased and sanitized ash volume. LÄS MER
24. Quantitative microscopy of coating uniformity
Sammanfattning : Print quality demands for coated papers are steadily growing, and achieving coating uniformity is crucial for high image sharpness, colour fidelity, and print uniformity. Coating uniformity may be divided into two scales: coating thickness uniformity and coating microstructure uniformity, the latter of which includes pigment, pore and binder distributions within the coating layer. LÄS MER
25. Surface Characteristics of Water Atomized Pre-alloyed Steel Powders and their effect on Sintering
Sammanfattning : Powder Metallurgy (PM) is an efficient method, in terms of cost and raw material utilization, for the production of structural parts that have strict dimensional tolerances and complex geometries. In the common processing route, steel powder is fabricated by water atomization and then pressed and sintered into the final component. LÄS MER