Sökning: "Continuous process"
Visar resultat 11 - 15 av 1096 avhandlingar innehållade orden Continuous process.
11. Structure and mechanical properties of dual phase steels : An experimental and theoretical analysis
Sammanfattning : The key to the understanding of the mechanical behavior of dual phase (DP) steels is to a large extent to be found in the microstructure. The microstructure is in its turn a result of the chemical composition and the process parameters during its production. LÄS MER
12. Självbeskrivning och tjänstekognition : Om processkartläggning på Arbetsförmedlingen
Sammanfattning : When duties are documented, new ideas are often created regarding how the work should be carried out. Writing is an important source of development, but unfortunately the possibilities are limited when it comes to transferring new ways of thinking to personnel. As with organizational change in general, employees tend to neglect new instructions. LÄS MER
13. From torrefaction to gasification : Pilot scale studies for upgrading of biomass
Sammanfattning : Increasing the share of biomass, preferably by replacing fossil fuels, is one way to mitigate the present climate change. Fossil coal can be directly replaced by co-combustion of coal and biomass and fossil engine fuels (gasoline and diesel) could potentially partly be replaced by synthetic renewable fuels produced via entrained flow gasification of biomass. LÄS MER
14. Investigation of Ilmenite from Oxygen Carrier Aided Combustion: Sulfur Interactions and Recovery of Elements
Sammanfattning : Oxygen- Carrier- Aided Combustion (OCAC) is a promising technology for the combustion of solid heterogeneous fuels such as biomass and waste in fluidized-bed (FB) units. In OCAC the conventional bed material silica sand is replaced by an oxygen carrier (OC). Replacing the bed material with an OC has many advantages. LÄS MER
15. Chemometric and signal processing methods for real time monitoring and modeling : applications in the pulp and paper industry
Sammanfattning : In the production of paper, the quality of the pulp is an important factor both for the productivity and for the final quality. Reliable real-time measurements of pulp quality are therefore needed. LÄS MER