Sökning: "wetting layer"

Visar resultat 11 - 15 av 36 avhandlingar innehållade orden wetting layer.

  1. 11. Water Absorption in Two-Layer Masonry Systems - Properties, profiles and predictions

    Författare :Peter Johansson; Avdelningen för Byggnadsmaterial; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; moisture-diffusivities; masonry; measuremets; moisture-profiles; Material technology; simulations; sorption-isotherms; Materiallära; materialteknik;

    Sammanfattning : The main impetus for this research was the desire to verify models for determining transient moisture profiles in the capillary range. For the evaluations, transient moisture profiles were both simulated and measured, after which the results of the two methods were compared. LÄS MER

  3. 12. Tailoring adhesion and wetting properties of cellulose fibers and model surfaces

    Författare :Emil Gustafsson; Lars Wågberg; Monika Österberg; Mikael Hedenqvist; KTH; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Sammanfattning : The layer-by-layer (LbL) technique was used to modify the surface of cellulose fibers by consecutive adsorption of poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) followed by a final adsorbed layer of anionic paraffin wax colloids. Paper hand sheets made from the modified fibers were found to be highly hydrophobic with a contact angle of 150°. LÄS MER

  4. 13. Experimental Studies on CO2 Absorption in Hollow Fiber Membrane Contactor

    Författare :Yuexia Lu; Jinyue Yan; Niklas Hedin; Mälardalens högskola; []
    Nyckelord :CO2 capture; Hollow fiber membrane contactor; Membrane gas absorption; Partial wetting; Surface modification; ; Energy- and Environmental Engineering; energi- och miljöteknik;

    Sammanfattning : Membrane gas absorption technology is considered as one of the promising alternatives to conventional techniques for CO2 separation from the flue gas of fossil fuels combustion. As a hybrid approach of chemical absorption and membrane separation, it may offer a number of important features, including operational flexibility, compact structure, linear scale up and predictable performance. LÄS MER

  5. 14. Novel oil resistant cellulosic materials

    Författare :Christian Aulin; Lars Wågberg; Derek Gray; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; oleophobic; MFC; cellulose; oil resistant; contact angle; XPS; SEM; Cellulose and paper engineering; Cellulosa- och pappersteknik;

    Sammanfattning : The aim of this study has been to prepare and characterise oil resistant cellulosic materials, ranging from model surfaces to papers and aerogels. The cellulosic materials were made oil resistant by chemical and topographic modifications, based on surface energy, surface roughness and barrier approaches. LÄS MER

  7. 15. Experimental Characterization of Electrodes and Multi-Scale Modeling of Swelling Induced Stresses in Lithium-ion Batteries

    Författare :Priyank Gupta; Peter Gudmundson; Göran Lindbergh; Erik Olsson; Elham Sahraei; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; lithium-ion batteries; mechanical characterization; multiscale modeling; homogenization; Solid Mechanics; Hållfasthetslära;

    Sammanfattning : Over the last few decades, rechargeable lithium-ion batteries have been extensively used in portable instruments due to their high energy density and low self-discharge rate. Recently, lithium-ion batteries have emerged as the most promising candidate for electric vehicles and stationary energy storage. LÄS MER