Sökning: "studs"

Visar resultat 1 - 5 av 22 avhandlingar innehållade ordet studs.

  1. 1. Squat defects and rolling contact fatigue clusters - Numerical investigations of rail and wheel deterioration mechanisms

    Författare :Robin Andersson; Chalmers University of Technology; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; rail surface irregularities; rolling contact fatigue clusters; dynamic vehicle–track interaction; rolling contact fatigue; studs; squats; fracture mechanics;

    Sammanfattning : Squat defects, a type of localised rolling contact fatigue damage appearing on rail surfaces with rail break as an ultimate consequence, have concerned infrastructure managers for the last couple of decades. In recent years similar types of defects—so-called studs—that are visually resembling squats, have started to appear. LÄS MER

  2. 2. Strength of slotted steel studs

    Författare :Tom Thöyrä; KTH; []
    Nyckelord :;

    Sammanfattning : .... LÄS MER

  3. 3. Thin-walled steel studs in fire : analysis and design recommendations

    Författare :Peter Karlström; Luleå tekniska universitet; []

    Sammanfattning : Development of steel frame modular buildings is gaining increased popularity and support throughout Europe. Due to flexibility in construction and good long-term performance, lightweight steel frame structures are often preferred solutions, for instance in partitions and suspended ceilings as well as for load-bearing elements. LÄS MER

  4. 4. Composite Bridges : Innovative ways of achieving composite action

    Författare :Robert Hällmark; Peter Collin; Ian May; Luleå tekniska universitet; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Composite action; bridges; steel; concrete; shear connectors; prefabrication; coiled spring pins; shear studs; post-installation; design guidance; Structural Engineering; Konstruktionsteknik;

    Sammanfattning : The topic of this thesis is steel-concrete composite bridges and innovative ways of achieving composite action. The typical superstructure consists of three main components: the steel girders, the concrete deck slab and the shear connectors. LÄS MER

  5. 5. Moisture-induced distortion in timber structures - examples based on partition walls

    Författare :Magnus Bäckström; Chalmers University of Technology; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; gypsum wallboard; spiral grain angle; restraint; Norway spruce; Connection; twist; spring;

    Sammanfattning : The shape of timber changes due to variations in moisture content (MC). In Scandinavia, producers normally dry timber to an MC of 18%. However, after the studs are built into the wall structure, for example, they may become distorted as a result of further drying in the structure. The final MC in a heated building in Scandinavia is about 8%. LÄS MER