Sökning: "matrix deformation"

Visar resultat 11 - 15 av 69 avhandlingar innehållade orden matrix deformation.

  1. 11. Deformation and failure of brittle rocks under compression

    Författare :Chunlin Li; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Mining and Rock Engineering; Gruv- och Berganläggningsteknik;

    Sammanfattning : This thesis describes the deformation and failure of rocks under compression through a micromechanics model and laboratory studies of the Kaiser effect. It comprises an overview and seven appended papers. The deformation model is developed based on the analysis of the behaviour of microcracks. LÄS MER

  3. 12. Deformation and Fracture Behavior of Transparent Wood-Polymer Biocomposites

    Författare :Erik Jungstedt; Lars Berglund; Sören Östlund; Bent Sørensen; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; biocomposites; fracture mechanics; strain field measurement; cohesive zone modeling; mechanical properties; Solid Mechanics; Hållfasthetslära;

    Sammanfattning : Transparent wood-polymer biocomposites (TWPBs) are interesting wood-based materials with a unique combination of optical transmittance and mechanical properties. The wood substrate is delignified (removal of lignin) while the wood microstructure is preserved. LÄS MER

  4. 13. Evolution of WC-Co cemented carbide microstructure during creep testing

    Författare :Mohamed Amine Yousfi; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; plastic deformation; cemented carbides; linear intercept; transmission electron microscopy.; electron backscattered diffraction; Atom probe tomography;

    Sammanfattning : The aim of this work is to understand the mechanisms behind the plastic deformation of WC-­Co based cemented carbides. The microstructures of two materials have been investigated before and after creep deformation using quantitative microscopy, atom probe tomography, and transmission electron microscopy. LÄS MER

  5. 14. Microstructure Development of WC-Co Based Cemented Carbides During Creep Testing

    Författare :Mohamed Amine Yousfi; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; NATURVETENSKAP; NATURAL SCIENCES; plastic deformation; TEM; APT; EBSD; WC grain growth.; Cr segregation;

    Sammanfattning : The aim of this work is to understand the mechanisms behind the plastic deformation of WC‐Co based cemented carbides. The microstructure of two series with different WC grain size was investigated before and after creep deformation using quantitative microscopy, atom probe tomography, and transmission electron microscopy. LÄS MER

  7. 15. Heat treatment of Al-Si-Cu-Mg casting alloys

    Författare :Emma Sjölander; Salem Seifeddine; Ingvar Svensson; Sten Johansson; Jönköping University; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cast aluminium alloys; Heat treatment; Solution treatment; Artificial ageing; Tensile properties; Plastic deformation; Microstructure; Modelling;

    Sammanfattning : Environmental savings can be made by increasing the use of aluminium alloys in the automotive industry as the vehicles can be made lighter. Increasing the knowledge about the heat treatment process is one task in the direction towards this goal. The aim of this work is to investigate and model the heat treatment process for Al-Si casting alloys. LÄS MER