Avancerad sökning

Visar resultat 1 - 5 av 6 avhandlingar som matchar ovanstående sökkriterier.

1. 1. On Gas Contaminants, and Bipolar Plates in Proton Exchange Membrane Fuel Cells

   Författare :Yasna Acevedo Gomez; Carina Lagergren; Göran Lindbergh; Rakel Wreland Lindström; Qinfeng Li; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; PEM fuel cell; contaminants; ammonia; nitrogen dioxide; degradation; recovery; bipolar plates; electroplating; Ni-Mo; Ni-Mo-P; internal contact resistance; PEM bränslecell; föroreningar; ammoniak; kvävedioxid; degradering; återhämtning; bipolära plattor; elektroplätering; Ni-Mo; Ni-Mo-P; interna kontaktmotståndet; Chemical Engineering; Kemiteknik;

   Sammanfattning : The proton exchange membrane (PEM) fuel cell is an electrochemical device that converts chemical energy into electrical energy through two electrocatalytic reactions. The most common catalyst used is platinum on carbon (Pt/C), which has shown the best performance in the fuel cell until now. LÄS MER

3. 2. Materials Reliability in PEM Fuel Cells

   Författare :Live Mølmen; Peter Leisner; Ulf Jansson; Jönköping University; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Fuel cell; PEMFC; Bipolar plate; Catalyst; Electrodeposition; Corrosion; Stainless steel; Accelerated stress tests; bränsleceller; PEM; bipolära plattor; katalysator; elektroplätering; korrosion; accelererad testning;

   Sammanfattning : As part of the global work towards reducing CO2 emissions, all vehicles needs to be electrified, or fueled by green fuels. Batteries have already revolutionised the car market, but fuel cells are believed to be a key energy conversion system to be able to electrify also heavy duty vehicles. LÄS MER

4. 3. Durability evaluation of PEM fuel cell components

   Författare :Live Mølmen; Peter Leisner; Lars Fast; Frode Seland; Jönköping University; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Proton exchange membrane fuel cell; bipolar plate; corrosion; interfacial contact resistance; electrocatalysis; Polymermembranbränsleceller; bipolära plattor; korrosion; kontaktresistans; katalys;

   Sammanfattning : Proton exchange membrane fuel cells (PEMFCs) are used to convert hydrogen and oxygen to electricity, heat, and water. There are no greenhouse gas emissions, given that the hydrogen is produced from renewable sources, such as water electrolysis from wind, hydro or solar energy. LÄS MER

5. 4. Control of particles codeposition and strengthening mechanisms in nickel based nanocomposite coatings

   Författare :Santiago Pinate; Caterina Zanella; Peter Leisner; Mari Lindström; Jönköping University; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Dispersion coatings; nanocomposite; Controlled particles codeposition; Surface treatment; ζ-potentials; Pulse-reverse deposition; Ultrasound agitation; Electrocrystallisation; Microstructure; Strengthening mechanisms; Hardness; Wear; Dispersionsbeläggning; nanokomposit; kontrollerad inkorporering av partiklar; ytbehandling; zeta-potential; bipolär pulsplätering; ultraljudsomrörning; elektrokristallisation; mikrostruktur; härdningsmekanism; hårdhet; nötning;

   Sammanfattning : Surface durability is a key factor in the service life of components. Depending on the aggressiveness of the environment, surface deterioration by wear or corrosion leads to failure of the bulk material and eventually to the loss of functionality of the component. LÄS MER

7. 5. Direct patterning processes for high-performance microsupercapacitors

   Författare :Viktoriia Mishukova; Jiantong Li; Mikael Östling; Gianluca Fiori; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; microsupercapacitors; energy storage; solid electrolyte; direct laser patterning; inkjet printing; functional nanomaterials.; mikrosuperkondensatorer; energilagring; fast elektrolyt; direkt lasermärkning; bläckstråleutskrift; funktionella nanomaterial; Informations- och kommunikationsteknik; Information and Communication Technology;

   Sammanfattning : The surge in miniaturized electronic components driven by the Internet of Things (IoT) has prompted an interest in non-traditional energy storage solutions. For these applications, reduction of size while preserving power and energy densities are of great importance. LÄS MER