Sökning: "one-port"

Visar resultat 1 - 5 av 7 avhandlingar innehållade ordet one-port.

  1. 1. Studies of flow duct acoustics with applications to turbocharged engines

    Detta är en avhandling från Stockholm : KTH

    Författare :Hans Rämmal; KTH.; [2009]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; IC-engine; turbocharger; duct termination; flow duct; exhaust system; inlet system; acoustic source; one-port; two-port; source model; transmission loss; two-port matrix; reflection coefficient; source strength; multi-load method; TECHNOLOGY Engineering physics Acoustics; TEKNIKVETENSKAP Teknisk fysik Akustik;

    Sammanfattning : A number of experimental and theoretical studies, performed in the field of technical flow duct acoustics are presented in this thesis. The acoustical methods treated are implemented on turbocharged IC-engines and engine gas exchange system components.A new method based on the well-known two-load technique has been developed. LÄS MER

  2. 2. Integration of Surface Acoustic Wave and Microfluidic Technologies for Liquid-Phase Sensing Applications

    Detta är en avhandling från ; Chalmers tekniska högskola; Gothenburg

    Författare :Kiryl Kustanovich; [2019]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; IDE; Resonator; SH-SAW; Impedance Spectroscopy; Surface Acoustic Wave; PDMS; LiNbO3; Microfluidics; Sensor;

    Sammanfattning : This thesis discusses a new concept for construction of a novel SAW in-liquid sensor employing surface acoustic wave resonance (SAR) in a one-port configuration. In this concept, the reflective gratings of a one-port SAW resonator are employed as mass loading-sensing elements, while the SAW transducer is protected from the measurement environment, reducing power losses significantly. LÄS MER

  3. 3. Methods for Modelling and Characterization of In-Duct Sources

    Detta är en avhandling från Stockholm : KTH Royal Institute of Technology

    Författare :Hans Rämmal; KTH.; [2005]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Sammanfattning : Methods to characterize acoustic sources in flow ducts have been investigated. In the first part of this thesis a measurement procedure to characterize an air terminal device using an acoustic one-port source model based on the two microphone technique has been tested and validated. LÄS MER

  4. 4. Estimation of line properties in the copper access network

    Detta är en avhandling från Stockholm : KTH Royal Institute of Technology

    Författare :Fredrik Lindqvist; Lunds universitet.; Lund University.; [2009]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Sammanfattning : The copper access-network operators face the challenge of developing and maintaining cost-effective digital subscriber line (DSL) services that are competitive to other broadband access technologies. The way forward is dictated by the demand of ever increasing data rates on the twisted-pair copper lines. LÄS MER

  5. 5. IC-engine intake noise predictions based on linear acoustics

    Detta är en avhandling från Stockholm : KTH

    Författare :Magnus Knutsson; KTH.; [2007]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TECHNOLOGY Engineering physics Acoustics; TEKNIKVETENSKAP Teknisk fysik Akustik;

    Sammanfattning : Shorter product development cycles, densely packed engine compartments and intensified noise legislation increase the need for accurate predictions of IC-engine air intake noise at early stages. The urgent focus on the increasing CO2 emissions and the efficiency of IC-engines, as well as new techniques such as homogeneous charge compression ignition (HCCI) might worsen the noise situation. LÄS MER