Sökning: "moving load"

Visar resultat 31 - 35 av 81 avhandlingar innehållade orden moving load.

  1. 31. Variable Valve Actuation in a Spark Ignition Engine - A Flow Field and Heat Release Study

    Författare :Fredrik Söderberg; Förbränningsmotorer; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; framdrivningssystem; Gases; plasma; fluid dynamics; plasmas; Gaser; fluiddynamik; vakuumteknik; vibrationer; akustik; Motors and propulsion systems; Motorer; hydraulik; Maskinteknik; vibration and acoustic engineering; Laser Doppler Velocimetry Particle Image Velocimetry PIV LDV Wavelet Computational Fluid Dynamics CFD Variable Valve Actuation Timing Turbulence Combustion Engine Spark Ignition Miller; hydraulics; vacuum technology; Mechanical engineering;

    Sammanfattning : The objective of this thesis was to find ways of improving part-load efficiency for a spark ignition engine by studying the effects of variable-valve actuation on fluid flow and combustion. The in-cylinder flow was measured with laser doppler velocimetry, LDV, and particle image velocimetry, PIV. LÄS MER

  3. 32. Patch loading resistance of plated girders : ultimate and serviceability limit state

    Författare :Jonas Gozzi; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Steel Structures; Stålbyggnad;

    Sammanfattning : Patch loading or partial edge loading of steel girder webs is a load case where a concentrated force is introduced perpendicular to the flange of a girder. This usually induces a local failure of the girder web in the vicinity of the loaded flange. LÄS MER

  4. 33. Lubrication of sliding bearings for hydropower applications

    Författare :Donald McCarthy; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Maskinelement; Machine Elements;

    Sammanfattning : The term "sliding bearing" refers to types of bearing where two conformal surfaces (usually the stationary bearing and a moving shaft) slide relative to one another with load distributed directly across the interface. A suitable lubricant may be employed to reduce the friction between these two surfaces. LÄS MER

  5. 34. Assisted Tele-Remote Control of Wheel Loaders in Underground Mining

    Författare :Siddharth Dadhich; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Industrial Electronics; Industriell elektronik;

    Sammanfattning : Tele-remote operation of mobile earth-moving machines in underground mines supported byoperator assistance functions is attractive for safety and productivity reasons. This way, operatorscan avoid hazardous underground environments with poor air quality and the productivitycan, in principle, be improved by saving the time required to commute drivers to and fromthe operational areas. LÄS MER

  7. 35. Dynamic Train-Turnout Interaction – Mathematical Modelling, Numerical Simulation and Field Testing

    Författare :Elias Kassa; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; contact forces; Karhunen–Loève expansion; dynamic train–turnout interaction; field test; wheel–rail contact geometry; stochastic analysis; switches and crossings; SRA - Transport;

    Sammanfattning : Two models for simulation of dynamic interaction between train and turnout are developed. The first one is derived using a commercial software for dynamics of multi-body systems. LÄS MER