Sökning: "hydraulik"

Visar resultat 1 - 5 av 49 avhandlingar innehållade ordet hydraulik.

  1. 1. Wastewater treatment in constructed wetlands : Effects of vegetation, hydraulics and data analysis methods

    Författare :Hristina Bodin; Karin Tonderski; Jesper Persson; Stefan Weisner; Per Milberg; Hans Brix; Linköpings universitet; []
    Nyckelord :constructed wetland; free water surface flow; wastewater treatment; Kenya; Sweden; vegetation; harvest; Cyperus papyrus; Echinochloa pyramidalis; mass load; phosphorus; ammonium; suspended solids; pollutant removal; hydraulics; residence time distribution; data analysis methods; Konstgjorda våtmarker; avloppsvatten; vattenrening; fosfor; ammonium; partiklar; Kenya; Sverige; växter; Cyperus papyrus; Echinochloa pyramidalis; skörd; hydraulik; dataanalysmetod;

    Sammanfattning : Degradation of water resources has become one of the most pressing global concerns currently facing mankind. Constructed Wetlands (CWs) represent a concept to combat deterioration of water resources by acting as buffers between wastewater and receiving water bodies. LÄS MER

  3. 2. Towards Horizontal Environmental Assessment for Supply Chain and Logistics Management

    Författare :Sajed Abukhader; Förpackningslogistik; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Electronic Commerce; Life Cycle Assessment; Horizontal Assessment; Operations Management; Supply Chain Management; Mechanical engineering; Environmental Management; vibration and acoustic engineering; vacuum technology; Maskinteknik; hydraulics; vakuumteknik; vibrationer; akustik; hydraulik; Logistics Management;

    Sammanfattning : Electronic commerce (E-commerce) is one of the issues that are expected to influence the various logistics and supply chain processes/operations including: production, packaging, warehousing, transportation, etc. Consequently, the environmental implications of E-commerce are of concern and interest. LÄS MER

  4. 3. Condition-Based Maintenance: Selection and Improvement of a Cost-Effective Vibration-Based Maintenance Policy for Rolling element Bearings

    Författare :Basim Al-Najjar; Sherwin David; Bo Bergman; Produktionsekonomi; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; vibration and acoustic engineering; vacuum technology; hydraulics; Mechanical engineering; a cost-effective vibration-based maintenance policy.; Integrated maintenance; Condition monitoring and control; Total Time on Test-plots; Vibration monitoring; effectiveness and accuracy; Failure causes and mechanisms; Maintenance quality; Maskinteknik; hydraulik; vakuumteknik; vibrationer; akustik; Commercial and industrial economics; Industriell ekonomi; Maintenance Technology; Failure analysis; Spectral analysis; Vibration-based maintenance policy; Maintenance cost-effectiveness; Selection of the most cost-effective maintenance strategy and policy; benchmarking; Total Quality Maintenance TQMain ; Cyclic improvement of maintenance experience; Terotechnology; Systemekonomi;

    Sammanfattning : Modern machinery is expensive and therefore must run at high availability and effectiveness which cannot be achieved without an effective maintenance policy. Condition monitoring, (CM), techniques can be utilised to reduce or arrest the rate of deterioration of a component so increasing operating life. LÄS MER

  5. 4. Analyses of Spur and Helical Gears

    Författare :Anette Andersson; Maskinelement; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; vacuum technology; vibration and acoustic engineering; Maskinteknik; hydraulik; vakuumteknik; vibrationer; akustik; hydraulics; Teknik; Mechanical engineering; Technological sciences; misalignment; contact ratio; load distribution; transmission error; tooth contact analysis;

    Sammanfattning : The thesis contains three papers that comprise studies of the dynamic behaviour of involute spur and helical gears, and one paper that describes a method to determine the influence of misalignment on the static helical gear tooth stress. In the first study, the influence of the contact ratio on the dynamic response of a spur gear was examined. LÄS MER

  7. 5. Numerical study of flows related to aerated stirred tanks

    Författare :Dragana Arlov; Strömningsteknik; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; plasma; fluiddynamik; Gaser; plasmas; fluid dynamics; Gases; Lattice Boltzmann method; Volume of Fluid; Aerated stirred tank; Large Eddy Simulation; Eulerian-Lagrangian model; Energy research; Energiforskning; Mechanical engineering; hydraulics; vacuum technology; vibration and acoustic engineering; Maskinteknik; hydraulik; vakuumteknik; vibrationer; akustik;

    Sammanfattning : The overall purpose with this work is to investigate the bubbly flow in a aerated stirred tank using numerical simulations. Aerated stirred tanks are commonly used in chemical processes for producing for example insulin and antibiotics. LÄS MER