Sökning: "material technology"

Visar resultat 11 - 15 av 5892 avhandlingar innehållade orden material technology.

  1. 11. Design of Cellulose-Based Materials via Sustainable and Scalable Processes

    Författare :Yunus Can Görür; Lars Wågberg; Per A. Larsson; Tsuguyuki Saito; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; LANTBRUKSVETENSKAPER; AGRICULTURAL SCIENCES; Transparent paper; cellulose nanofiber; fibers; CNF; nanofibrillation; nanopaper; functional hybrids; nanocomposites; green materials; energy storage; binders; Transparent papper; cellulosa nanofiber; fibrer; CNF; nanofibrillering; nanopapper; funktionella hybrider; nanokompositer; gröna material; energilagring; bindemedel; Fiber- och polymervetenskap; Fibre and Polymer Science;

    Sammanfattning : Plastic pollution is one of the most pressing environmental issues in today’s world. Addressing this problem calls for the development of environmentally friendly alternatives that would reduce the amount of persistent plastic waste. LÄS MER

  3. 12. Multiscale materials design of hard coatings for improved fracture resistance and thermal stability

    Författare :Phani Kumar Yalamanchili; Magnus Odén; Naureen Ghafoor; Emilio Jiménez-Piqué; Jon Molina; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES;

    Sammanfattning : Physical vapor deposited hard coatings comprised of cubic (c) transition metal (TM)-Al-N, and (TM)-Si-N are the current workhorse materials for a large number of metal cutting and wear resistant applications to fight against the extreme conditions of temperature and stress simultaneously. In spite of a high degree of sophistication in terms of material choice and microstructural design, a lower fracture resistance and limited thermal stability of the coatings remains a technological challenge in the field. LÄS MER

  4. 13. Multicomponent Alloying for Improved Hard Coatings

    Författare :Rikard Forsén; Magnus Odén; Naureen Ghafoor; Mats Johansson; Jochen Schneider; Linköpings universitet; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Sammanfattning : Coatings are vital to protect and to increase the productivity of cutting tools in high speed and dry cutting applications. During the cutting operation the temperature may exceed 1000 ºC it is therefore necessary that the coatings withstand high temperatures. LÄS MER

  5. 14. Mechanical and thermal stability of hard nitride coatings

    Författare :Yu-Hsiang Chen; Magnus Odén; Lina Rogström; Tomasz Liskiewicz; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES;

    Sammanfattning : Hard coating’s thermal stability is essential due to the high temperature environment of high-speed cutting applications, while the phase and microstructure evolution induced by exposing the coating to high temperature affects the mechanical properties. In this thesis, the mechanical stability of arc-evaporated, hard, transition metal nitride coatings annealed at high temperature is analyzed and related to the phase and microstructure evolution. LÄS MER

  7. 15. Grinding effects on surface integrity, flexural strength and contact damage resistance of coated hardmetals

    Författare :Jing Yang; Magnus Odén; Luis Llanes; Andrew Gant; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES;

    Sammanfattning : The tribological and mechanical behavior of coated tools depends not only on intrinsic properties of the deposited film but also on substrate surface and subsurface properties – such as topography and residual stress state – as well as on interface adhesion strength. It is particularly true in the case of coated tools based on WC-Co cemented carbides (backbone materials of the tool manufacturing industry, and simply referred to as hardmetals in practice) as substrates. LÄS MER