Sökning: "TRIBOLOGICAL CHARACTERIZATION"

Visar resultat 6 - 10 av 19 avhandlingar innehållade orden TRIBOLOGICAL CHARACTERIZATION.

  1. 6. Carbon reinforced UHMWPE composites for orthopaedic applications : characterization and biological response to wear particles

    Författare :Silvia Suñer Moreno; Jeffrey Dixon; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Maskinelement; Machine Elements;

    Sammanfattning : Joint replacements have considerably improved the quality of life of patients with joints damaged by disease or trauma. However, problems associated with wear particles generated due to the relative motion between the components of the bearing are still present and can lead to the eventual failure of the implant. LÄS MER

  3. 7. Synthesis and Characterization of Amorphous Carbide-based Thin Films

    Författare :Matilda Folkenant; Ulf Jansson; Erik Lewin; Paul Mayrhofer; Uppsala universitet; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; Amorphous; coating; thin film; nanocomposite; sputter deposition; PVD; XPS; SEM; TEM; electrical properties; mechanical properties;

    Sammanfattning : In this thesis, research on synthesis, structure and characterization of amorphous carbide-based thin films is presented. Crystalline and nanocomposite carbide films can exhibit properties such as high electrical conductivity, high hardness and low friction and wear. LÄS MER

  4. 8. Synthesis and Characterization of High Entropy Alloy and Coating

    Författare :Sajid Alvi; Farid Akhtar; Marta-Lena Antti; Don Seo; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Engineering Materials; Materialteknik;

    Sammanfattning : High entropy alloys (HEAs) are a new class of alloys that contains five or more principal elements in equiatomic or near-equiatomic proportional ratio. The configuration entropy in the HEAs tends to stabilize the solid solution formation, such as body-centered-cubic (BCC), face-centered-cubic (FCC) and/or hexagonal-closed-pack (HCP) solid solution. LÄS MER

  5. 9. Tribology of self-lubricating polymer composites for hydropower applications

    Författare :Maria Rodiouchkina; Jens Hardell; Kim Berglund; Jan Ukonsaari; Michał Wasilczuk; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; polymer composites; hydropower; sliding wear; sliding friction; self-lubricating; transfer layers; material characterization; surface analysis; high contact pressure; low sliding speed; Machine Elements; Maskinelement;

    Sammanfattning : The ongoing global climate crisis and its impacts calls for urgent actions, such as significant reduction of CO2 emissions by introducing more renewable energy. This has led to a rapid integration of variable power sources, such as wind and solar power, into the electricity systems. LÄS MER

  7. 10. Oil consumption and Friction in a Piston Ring-Cylinder Liner assembly.-A multifunctional Surface Approach

    Författare :Cecilia Anderberg; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cylinder liner surface; surface characterization; oil consumption; surface texture parameters;

    Sammanfattning : About a half of the frictional losses in an internal combustion engine come from the interactions between the piston assembly and cylinder liner surface. The tribological considerations in the contact between the piston ring and cylinder liner have attracted much attention over the past few decades. LÄS MER