Sökning: "Per Engstrand"

Visar resultat 6 - 10 av 30 avhandlingar innehållade orden Per Engstrand.

  1. 6. Low consistency refining of mechanical pulp : process conditions and energy efficiency

    Författare :Stefan Andersson; Per Engstrand; Christer Sandberg; Mittuniversitetet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Mechanical pulping; low consistency refining; energy efficiency; rotor position; plate gap; fibre concentration;

    Sammanfattning : The thesis is focussed on low consistency (LC) refining of mechanical pulp. Theresearch included evaluations of energy efficiency, development of pulpproperties, the influence of fibre concentration on LC refining and effects of rotorposition in a two-zoned LC refiner. LÄS MER

  3. 7. Production and application of fine fractions made of chemical pulp for enhanced paperboard strength

    Författare :Elisabeth Björk; Per Engstrand; Mark Martinez; Mittuniversitetet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Sammanfattning : For all kinds of paperboard packages, the bending stiffness of the paperboard is a crucial property. In multi-ply folding boxboard (FBB) grades, this is obtained by placing different stocks in the outer and centre plies of the board. In the outer plies, a stock with a high tensile stiffness is used, typically made from refined kraft pulp fibres. LÄS MER

  4. 8. Process modelling based on data from an evaporation and a CTMP process : Analysis of energy efficiency and process variability

    Författare :Daniel Ekbåge; Lars Nilsson; Helena Håkansson; Per Engstrand; Karlstads universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; CTMP; process modelling; evaporation; energy efficiency; Miljö- och energisystem; Environmental and Energy Systems;

    Sammanfattning : The manufacture of pulp and paper is an energy intensive process configured of several unit processes that shape a network of flows of wood chips, chemical pulp, mechanical pulp, paperboard, steam and other important components. Improved energy efficiency supports sustainability of the process and the products. LÄS MER

  5. 9. Storage of Hydrogen Peroxide Bleached Mechanical Pulp : Reduction in Reflectance over the Visible Spectrum

    Författare :Sofia Enberg; Per Engstrand; Magnus Paulsson; Mats Rundlöf; Patrik Axelsson; Øyvind Eriksen; Yonghao Ni; Mittuniversitetet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Sammanfattning : The objective of this thesis is to determine possible causes of the darkening of hydrogen peroxide bleached mechanical pulp over the visible spectrum and their relative contributions. It focuses on both process conditions and the composition of the pulp and the dilution water, including additions or losses of material along the process line from the bleach tower to the paper machine. LÄS MER

  7. 10. ATMP Process : Improved Energy Efficiency in TMP Refining Utilizing Selective Wood Disintegration and Targeted Application of Chemicals

    Författare :Dmitri Gorski; Per Engstrand; Jan Hill; Lars Johansson; Mittuniversitetet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; ATMP; TMP; Hydrogen Peroxide; Magnesium Hydroxide; Mechanical Pre-Treatment; Fibre Characterisation; Refiner Bleaching; SC Paper; Newsprint; Cellulose and paper engineering; Cellulosa- och pappersteknik;

    Sammanfattning : This thesis is focused on the novel wood chip refining process called AdvancedThermomechanical Pulp (ATMP) refining. ATMP consists of mechanical pretreatmentof chips in Impressafiner and Fiberizer prior to first stage refining atincreased intensity. LÄS MER