Sökning: "TMP"

Visar resultat 1 - 5 av 52 avhandlingar innehållade ordet TMP.

  1. 1. Modelling aspects in TMP refining

    Författare :Fredrik Rosenqvist; Chalmers University of Technology; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TMP refining; internal interconnections; direction-dependent dynamics; parameter estimation;

    Sammanfattning : .... LÄS MER

  2. 2. Influence of acid hydrogen peroxide treatment on refining energy and TMP properties

    Författare :Karin Walter; Per Engstrand; Magnus Paulsson; Lennart Salmén; Mittuniversitetet; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TMP; Black Spruce; Energy reduction; Hydrogen peroxide; Ferrous sulphate; Refining; Inter-stage treatment; Pulp and paper properties; Fenton´s reagent; Bleaching; Sodium dithionite; Brightness; Metals; Fibre dimensions; Cross-sectional dimensions; Chemical composition; Cellulose and paper engineering; Cellulosa- och pappersteknik;

    Sammanfattning : The potential of using acid hydrogen peroxide under Fenton conditions to lower the electrical energy consumed during the production of Black spruce (Picea mariana) thermomechanical pulp (TMP) was investigated. The chemical system, which consisted of ferrous sulphate, hydrogen peroxide and optionally an enhancer (3,4-dimethoxybenzyl alcohol, ethylenediaminetetraacetic acid or oxalic acid/sodium oxalate), was evaluated as an inter-stage treatment where the primary refiner was used as a mixer. LÄS MER

  3. 3. ATMP Process : Improved Energy Efficiency in TMP Refining Utilizing Selective Wood Disintegration and Targeted Application of Chemicals

    Författare :Dmitri Gorski; Per Engstrand; Jan Hill; Lars Johansson; Mittuniversitetet; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; ATMP; TMP; Hydrogen Peroxide; Magnesium Hydroxide; Mechanical Pre-Treatment; Fibre Characterisation; Refiner Bleaching; SC Paper; Newsprint; Cellulose and paper engineering; Cellulosa- och pappersteknik;

    Sammanfattning : This thesis is focused on the novel wood chip refining process called AdvancedThermomechanical Pulp (ATMP) refining. ATMP consists of mechanical pretreatmentof chips in Impressafiner and Fiberizer prior to first stage refining atincreased intensity. LÄS MER

  4. 4. The influence of high temperature on the discoloration and degradation of carbohydrates and on hydrogen peroxide bleaching of spruce TMP

    Författare :Louise Logenius; Hans Höglund; Roland Agnemo; Mittuniversitetet; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; Temperature; metal ions; cellulose; glucuronic acid; UV-Vis spectroscopy; spruce; TMP; hydrogen peroxide bleaching; spectroscopy; optical properties; Chemical engineering; Kemiteknik;

    Sammanfattning : When processing wood to obtain pulp, the fibers are subjected to high temperatureat moisture levels and to the influence of metal ions. Many process developmentshave resulted in utilization of higher temperatures that induce chemical reactionsin the wood fibers. This thesis deals with some aspects of using high temperaturesin pulping processes. LÄS MER

  5. 5. On the wood chipping process : a study on basic mechanisms in order to optimize chip properties for pulping

    Författare :Lisbeth Hellström; Torbjörn Carlberg; Per Engstrand; Sören Östlund; Mittuniversitetet; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Wood chipping; Chip formation; Digital Speckle Photography; Friction; Fracture Processes; Analytical model; Laboratory Wood Chipper; Force Measurement; Vibration Synthesis; Energy Efficiency; Chip Damage; TMP; CTMP; Cellulose and paper engineering; Cellulosa- och pappersteknik;

    Sammanfattning : In both the chemical and mechanical pulping process, the logs are cut into wood chips by a disc chipper before fibre separation. To make the wood chipping process more efficient, one have to investigate in detail the coupling between process parameters and the quality of the chips. LÄS MER