Sökning: "Mechanical load"

Visar resultat 16 - 20 av 952 avhandlingar innehållade orden Mechanical load.

  1. 16. Thermal impact on rolling contact fatigue of railway wheels

    Författare :Sara Caprioli; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Railway wheels; Thermomechanical finite element analysis; Frictional rolling contact; Thermal fracture; Tread braking; Rolling contact fatigue;

    Sammanfattning : Rolling contact fatigue (RCF) is a very common and costly damage mechanism for rails and wheels. This thesis investigates the influence of combined thermal and mechanical loading on RCF of railway wheels on the basis of numerical predictions. LÄS MER

  3. 17. Reduction of heat transfer and heat load in internal combustion engines

    Författare :Joop Somhorst; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; efficiency; TBC; thermal barrier coating; surface roughness; engine; heat transfer; emissions; alumina; zirconia;

    Sammanfattning : Thermal insulation of the combustion chamber in an engine has great potential to reduce fuel consumption and CO2 emissions. Research on thermal barrier coatings (TBC) has been performed since the early eighties to address this potential. LÄS MER

  4. 18. Three-Dimensional Load-Deformation Relationships of Arbitrarily Loaded Coiled Springs

    Författare :Lars Lindkvist; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; extended stiffness model; helical spring; non-linear deformation; stiffness matrix; coiled spring; arbitrary load; large deformation; three-dimensional;

    Sammanfattning : This paper reports the development of a computer based tool that can be used to predict the three-dimensional load-deformation relationships of arbitrarily loaded coiled springs. The non-linear deformation of the spring is calculated by dividing the spring into small elements for which the load-deformation relationships can be considered to be linear. LÄS MER

  5. 19. Analyses of Spur and Helical Gears

    Författare :Anette Andersson; Maskinelement; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; vacuum technology; vibration and acoustic engineering; Maskinteknik; hydraulik; vakuumteknik; vibrationer; akustik; hydraulics; Teknik; Mechanical engineering; Technological sciences; misalignment; contact ratio; load distribution; transmission error; tooth contact analysis;

    Sammanfattning : The thesis contains three papers that comprise studies of the dynamic behaviour of involute spur and helical gears, and one paper that describes a method to determine the influence of misalignment on the static helical gear tooth stress. In the first study, the influence of the contact ratio on the dynamic response of a spur gear was examined. LÄS MER

  7. 20. Time Domain Methods for Load Identification of Linear and Nonlinear Systems

    Författare :Patrik Nordberg; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; inverse problem; ill-conditioning; upper block triangular Toeplitz matrix; regularization; wavelet parameterization; least squares problem; input estimation; time domain; linear and nonlinear systems; load identification;

    Sammanfattning : The automotive industry faces an increasing demand for virtual prototyping to simulate the operation conditions of vehicles and subsystems. Each component, as well as the complete vehicle, must meet the desired design requirements in a time- and cost-efficient development process. LÄS MER