Sökning: "Material yield"

Visar resultat 11 - 15 av 593 avhandlingar innehållade orden Material yield.

1. 11. Modeling and experimental characterization of large biaxial strains and induced anisotropy in pearlitic rail steel

   Författare :Knut Andreas Meyer; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Pearlitic steel; yield criteria; distortional hardening; axial-torsion; kinematic hardening; biaxial loading; hyperelasto-plasticity;

   Sammanfattning : Large shear strains accumulate in the near-surface region under the running band of railway rails. In this region, rolling contact fatigue cracks often initiate, causing major problems for the railway industry. LÄS MER

3. 12. Thermomechanical Processing of Nickel-Base Alloy 825

   Författare :Munir Al-Saadi; Pär Jönsson; Christopher Hulme-Smith; Göran Engberg; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Alloy 825; Cast and wrought structures; Hot compression test; Microstructural evaluation; Modelling; Yield strength; Strengthening mechanisms; Teknisk materialvetenskap; Materials Science and Engineering;

   Sammanfattning : Alloy 825 material was studied using a Gleeble-3800 thermosimulatorby performing single-hot compression experiments.Optical microscopy and electron backscatter diffraction wereutilized to characterize the microstructure. Dynamicrecrystallization is not considerable in the as-cast alloy anddislocation recovery is deemed to be dominant. LÄS MER

4. 13. Sub-grain structure in additive manufactured stainless steel 316L

   Författare :Yuan Zhong; Zhijian Shen; Daqing Cui; Moataz Attallah; Stockholms universitet; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Additive manufacturing; Selective laser melting; Electron beam melting; stainless steel; Oxide dispersion strengthened steel; Cellular structure; Nano-inclusions; Materials Chemistry; materialkemi;

   Sammanfattning : The thesis focuses on exploring the sub-grain structure in stainless steel 316L prepared by additive manufacturing (AM). Two powder-bed based AM methods are involved: selective laser melting (SLM) and electron beam melting (EBM). LÄS MER

5. 14. Heat treatment of Al-Si-Cu-Mg casting alloys

   Författare :Emma Sjölander; Salem Seifeddine; Ingvar Svensson; Sten Johansson; Jönköping University; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cast aluminium alloys; Heat treatment; Solution treatment; Artificial ageing; Tensile properties; Plastic deformation; Microstructure; Modelling;

   Sammanfattning : Environmental savings can be made by increasing the use of aluminium alloys in the automotive industry as the vehicles can be made lighter. Increasing the knowledge about the heat treatment process is one task in the direction towards this goal. The aim of this work is to investigate and model the heat treatment process for Al-Si casting alloys. LÄS MER

7. 15. Deformations and stresses in butt-welding of plates : numerical simulation and experimental verification

   Författare :Lars-Erik Lindgren; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Material Mechanics; Materialmekanik;

   Sammanfattning : Deformation and stresses in butt-welding of plates were studied. The work includes numerical simulation and experimental verification. The simulations were performed by use of the finite element method. Temperature dependence of material properties and phase transformations were considered. LÄS MER