Sökning: "Pär Jönsson"
Visar resultat 1 - 5 av 99 avhandlingar innehållade orden Pär Jönsson.
Sammanfattning : Alloy 825 material was studied using a Gleeble-3800 thermosimulatorby performing single-hot compression experiments.Optical microscopy and electron backscatter diffraction wereutilized to characterize the microstructure. Dynamicrecrystallization is not considerable in the as-cast alloy anddislocation recovery is deemed to be dominant. LÄS MER
Sammanfattning : This thesis focuses on the analysis of kinetics of i) low-temperature pyrolysis of gaseous hydrocarbons, ii) high-temperature steam gasification of char of wood pellets (>700oC), iii) high temperature pyrolysis of straw pellets in an atmosphere of argon and steam, and iv) high temperature pyrolysis of slices of transversally cut wooden sticks. The results of the kinetic measurements in the high-temperature cases are approximated using a least-square based optimization software, which was specially developed to analyse kinetics prone for deviation from the Arrhenius law. LÄS MER
3. Coupling of a fundamental mathematical fluid flow model with computational thermodynamics model to study the decarburisation
Sammanfattning : .... LÄS MER
4. Numerical Study of the Gas Flow and Heat Transfer during Electromagnetic Stirring and Post Combustion in EAFs
Sammanfattning : The effect of electromagnetic stirring on scrap melting and post combustion in two different electric arc furnaces (EAFs) have been studied using numerical modelling. The effect of electromagnetic stirring on melting of a piece of scrap located at the eccentric bottom tapping (EBT) region of an EAF has been studied. LÄS MER
Sammanfattning : The use of a swirling flow can provide a more uniform velocity distribution and a calmer filling condition according to previous studies of both ingot and continuous casting processes of steel. However, the existing swirling flow generation methods developed in last decades all have some limitations. LÄS MER