Sökning: "monotont"
Visar resultat 1 - 5 av 9 avhandlingar innehållade ordet monotont.
1. Externally positive systems : Analysis and control based on combinatorial polynomials
Sammanfattning : Monotonic tracking is required in many control systems, including those that cannot tolerate any overshoots and undershoots in their closed-loop responses. Classical examples are found in vehicle cruise control and liquid tank level control. LÄS MER
2. Ab initio Investigation of Face-centered cubic High-Entropy Alloys
Sammanfattning : High-entropy alloys (HEAs) represent a special group of solid solutions containing five or more principal elements. The new design strategy has attracted extensive attention from the materials science community. The design and development of HEAs with desired properties have become an important subject in materials science and technology. LÄS MER
3. Characterization of Conduction and Polarization Properties of HVDC Cable XLPE Insulation Materials
Sammanfattning : Since its first introduction in 1998, extruded direct current (DC) cable technology has been growing rapidly leading to many cable system installations with operation voltages up to 320 kV. Cable manufacturers invest heavily on technology development in this field and today extruded DC cable systems for operation voltages as high as 525 kV are commercially available. LÄS MER
4. Characterization of Conduction and Polarization Properties of HVDC Cable XLPE Insulation Materials
Sammanfattning : High voltage direct current (HVDC) cables with extruded insulation system were introduced in 1998. Since then this technology has been growing rapidly with many installations that are today operational at voltages up to 320 kV. LÄS MER
5. Observation Methods and Imaging Techniques. Assessments of physical exposure in repetitive work with focus on neck and upper extremities
Sammanfattning : Observation methods and imaging techniques - assessments of physical exposure in repetitive work with focus on neck and upper extremities The aim of this thesis was to develop, establish and validate observation methods for exposure assessments in epidemiological studies of repetitive work. A second aim was to increase the quality of input data for biomechanical shoulder models, by reliability and validity studies of Magnetic Reso-nance Imaging (MRI) and Ultrasound Scanning (US). LÄS MER