Avancerad sökning

Visar resultat 1 - 5 av 7 avhandlingar som matchar ovanstående sökkriterier.

  1. 1. Growth and Heat Treatment Studies of Al-Cr-O and Al-Cr-O-N Thin Films

    Författare :Ali Khatibi; Lars Hultman; Per Eklund; Marcus Morstein; Linköpings universitet; []
    Nyckelord :;

    Sammanfattning : Aluminum oxide based thin films are applied on cutting tool inserts as a top layer to protect the underlying nitride or carbide functional layer from the harsh working environment in terms of abrasive and chemical wear under thermal and pressure load. This Thesis explores the synthesis and characterization of the next generations of multifunctional wear-resistant thin film coatings in the form of Al-Cr-O and Al-Cr-O-N compounds. LÄS MER

  3. 2. Super duplex stainless steels : Microstructure and propertiesof physically simulated base and weld metal

    Författare :Vahid Hosseini; Leif Karlsson; Högskolan Väst; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Super duplex stainless steel; weld metal; physical simulation; phase balance; precipitation; secondary phases; corrosion; nitrogen loss; arc heat treatment; production technology; Production Technology; Produktionsteknik; Manufacturing and materials engineering; Produktions- och materialteknik;

    Sammanfattning : High-temperature processing and application of super duplex stainless steel(SDSS) are associated with the risk of changes in the ferrite/austenite balance and precipitation of secondary phases. This study was therefore aimed at improving knowledge about effects of thermal cycles on the microstructure and properties of SDSS base and weld metal. LÄS MER

  4. 3. Evaluation of Non-Metallic Inclusions after Deformation and Their Effect on the Machinability of Steel

    Författare :SHUO GUO; Pär Jönsson; Andrey Karasev; Anders Tilliander; Robert Eriksson; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Steel; Heat treatment; REM-treat steel; Ce modification; Chip breakability; weight distribution of chips Non-metallic inclusions; Deformation; Electrolytic extraction; stål; värmebehandling; REM-behandlade stål; Ce modifiering; spånbrytning; viktsdistribution av spån; icke-metalliska inneslutningar; deformation; elektrolytisk extraktion.; Teknisk materialvetenskap; Materials Science and Engineering;

    Sammanfattning : The presence of non-metallic inclusions (NMIs) have critical effects on both the mechanical properties and machinability of steels. In the present thesis, one focus is to study the characteristics of deformed sulfides (MnS) for a stainless steel (3R65) and a tool steel (42CrMo4). LÄS MER

  5. 4. Influence of multiple welding cycles on microstructure and corrosion resistance of a super duplex stainless steel

    Författare :Vahid Hosseini; Leif Karlsson; Högskolan Väst; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Super duplex stainless steel; autogenous TIG welding; multiple welding thermal cycles; sensitization; nitrogen loss; sigma phase; ferrite content; production technology; Production Technology; Produktionsteknik; Manufacturing and materials engineering; Produktions- och materialteknik;

    Sammanfattning : Super duplex stainless steel (SDSS) has found a wide use in demanding applications such as offshore, chemical and petrochemical industries thanks to its excellent combination of mechanical properties and corrosion resistance. Welding of SDSS, however, is associated with the risk of precipitation of secondary phases and formation of excessive amounts of ferrite in the weld metal and heat affected zone. LÄS MER

  7. 5. Rapid solidification behaviour of Fe and Al based alloys

    Författare :Sathees Ranganathan; Hasse Fredriksson; Zhongyun Fan; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Rapid solidification; Melt spinning; Metastable phases; Fe based alloys.; Metallurgical process and manufacturing engineering; Metallurgisk process- och produktionsteknik;

    Sammanfattning : Rapid solidification experiment on Fe-Cr-Mo-Mn-Si-C alloy was performed to investigate metastable phases formed during the solidification. A wide range of cooling rate was used to analyse the sample from melt spinning technique (~107 K/s) to water quenching method (~102 K/s). LÄS MER