Sökning: "Fe based alloys."
Visar resultat 1 - 5 av 102 avhandlingar innehållade orden Fe based alloys..
1. Rapid solidification behaviour of Fe and Al based alloys
Sammanfattning : Rapid solidification experiment on Fe-Cr-Mo-Mn-Si-C alloy was performed to investigate metastable phases formed during the solidification. A wide range of cooling rate was used to analyse the sample from melt spinning technique (~107 K/s) to water quenching method (~102 K/s). LÄS MER
2. Beyond Breakaway Corrosion: Secondary Corrosion Protection of Iron-based Alloys
Sammanfattning : Metallic materials intended for high temperature applications must resist both mechanical and environmental degradation. The ability to withstand corrosion is an important aspect of high temperature materials and is of major concern in, for example, heat and power production. LÄS MER
3. Concepts for hot sheet metal forming of titanium alloys
Sammanfattning : To increase the competitiveness of the Swedish aero engine industry alternative manufacturing methods for load carrying aero engine structures are desired, in order to reduce product cost and enable weight reduction and thereby fuel consumption. Traditionally, these structures mainly consist of large-scaled single castings of e.g. LÄS MER
4. Experimental study of phase separation in Fe-Cr based alloys
Sammanfattning : Duplex stainless steels (DSSs) are important engineering materials due to their combination of good mechanical properties and corrosion resistance. However, as a consequence of their ferrite content, DSSs are sensitive to the so-called ‘475°C embrittlement’, which is induced by phase separation, namely, the ferrite decomposed into Fe-rich ferrite (α) and Cr-rich ferrite (α'), respectively. LÄS MER
5. Modelling phase separation in Fe-Cr alloys : A continuum approach
Sammanfattning : The formation of Cr-rich and Fe-rich domains upon ageing of an initially homogeneous Fe-Cr alloy at elevated temperatures (300-600 ºC) is commonly referred to as phase separation. The behaviour originates from a miscibility gap in the Fe-Cr phase diagram. LÄS MER