Sökning: "Anders Tilliander"

Visar resultat 1 - 5 av 11 avhandlingar innehållade orden Anders Tilliander.

1. 1. Fundamental Mathematical Modeling of Gas Injection in AOD Converters with Emphasis on the Inlet

   Författare :Anders Tilliander; KTH; []
   Nyckelord :AOD; nozzle; modeling; steel; fluid flow; gas injection.;

   Sammanfattning : The overall purpose of the present work has been to developa novel mathematical model of the gas injection in the AODconverter process, based on fundamental transport equations.The model development was divided into two major steps, wherethe first step involved modeling of gas injection through acylindrical nozzle at high gas flow rates (the nozzle model). LÄS MER

3. 2. Modeling of fluid flow and heat transfer characteristics in AOD nozzles

   Författare :Anders Tilliander; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Metallurgical process and manufacturing engineering; Metallurgisk process- och produktionsteknik;

   Sammanfattning : .... LÄS MER

4. 3. Some Aspects on Macroscopic Mixing in a Tundish

   Författare :Chao Chen; Anders Tilliander; Lage Jonsson; Pär Jönsson; Guoguang Cheng; Seppo Louhenkilpi; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; continuous reactor; tundish; tracer; macroscopic mixing; water model; CFD; turbulence models; inclusions removal; inclusions deposition; dynamic removal; Materials Science and Engineering; Teknisk materialvetenskap;

   Sammanfattning : Two aspects on macroscopic mixing in a continuous flow system – metallurgical tundish were studied. Specifically, 1) the first focus was on salt solution tracer mixing, which is important for tundish design from perspectives of tracer technology and Residence Time Distributions (RTD) as well as for the understanding of the macroscopic mixing in tundishes. LÄS MER

5. 4. Improved mapping of steel recycling from an industrial perspective

   Författare :Alicia Gauffin; Anders Tilliander; Ichiro Daigo; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Recycling rate; lifetime; steel scrap; scrap reserve; dynamic material flow modelling; environmental analysis; greenhouse gas emissions; energy; alloy content; forecasting; backcasting; Teknisk materialvetenskap; Materials Science and Engineering;

   Sammanfattning : The results from this study show that it is possible to obtain data series on the steel scrap collection based on mass balance model on the crude steel production figures by steelmaking reactor type and additional knowledge on process metallurgy as well as information on inputs and outputs into the reactors with an area correlation coefficient of 0,91 compared to data obtained from trade statistics. Furthermore, the study shows that based on a new method it is possible to calculate the time duration of mass flows on a continuous basis. LÄS MER

7. 5. Evaluation of Non-Metallic Inclusions after Deformation and Their Effect on the Machinability of Steel

   Författare :SHUO GUO; Pär Jönsson; Andrey Karasev; Anders Tilliander; Robert Eriksson; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Steel; Heat treatment; REM-treat steel; Ce modification; Chip breakability; weight distribution of chips Non-metallic inclusions; Deformation; Electrolytic extraction; stål; värmebehandling; REM-behandlade stål; Ce modifiering; spånbrytning; viktsdistribution av spån; icke-metalliska inneslutningar; deformation; elektrolytisk extraktion.; Teknisk materialvetenskap; Materials Science and Engineering;

   Sammanfattning : The presence of non-metallic inclusions (NMIs) have critical effects on both the mechanical properties and machinability of steels. In the present thesis, one focus is to study the characteristics of deformed sulfides (MnS) for a stainless steel (3R65) and a tool steel (42CrMo4). LÄS MER