Sökning: "thermomechanical properties"
Visar resultat 21 - 25 av 72 avhandlingar innehållade orden thermomechanical properties.
21. Rock Mechanical Consequences of Refrigeration. A Study Based on a Pilot Scale Rock Cavern
Sammanfattning : The deformation of a rock mass due to temperature decrease below freezing is very complex, since many factors are involved; thermal strain, strain due to stress change, stress re-distribution, ice formation and the temperature dependency of rock mechanical and thermo-physical properties. The objective of this study was to achieve a better understanding of the rock mass response to thermo-mechanical loading when storing low temperature products in rock caverns excavated in hard crystalline rock masses. LÄS MER
22. Distributions Of Fiber Characteristics As A Tool To Evaluate Mechanical Pulps
Sammanfattning : Mechanical pulps are used in paper products such as magazine or news grade printing papers or paperboard. Mechanical pulping gives a high yield; nearly everything in the tree except the bark is used in the paper. This means that mechanical pulping consumes much less wood than chemical pulping, especially to produce a unit area of printing surface. LÄS MER
23. Xyloglucan-based polymers and nanocomposites – modification, properties and barrier film applications
Sammanfattning : Biopolymers from renewable resources are of interest for packaging applications as an alternative to conventional petroleum-based polymers. One of the major application areas for biopolymers is food packaging, where a candidate polymer should meet critical requirements such as mechanical and oxygen barrier performance, also in humid conditions. LÄS MER
24. Additive Manufacturing of Ni-Fe Superalloys : Exploring the Alloying Envelope and the Impact of Process on Mechanical Properties
Sammanfattning : Additive manufacturing of metals has received a lot of attention in the last decade as this family of manufacturing processes allows the manufacturing of complicated geometries which would be difficult to produce using conventional manufacturing techniques. Additive manufacturing of the Ni-Fe based superalloys 625 and 718 using the Powder Bed Fusion – Laser Beam (PBF-LB) process is facilitated by the fact that these alloys were developed as weldable alternatives to other high-strength, high-temperature Ni-based superalloys. LÄS MER
25. Crack growth in single crystal nickel base superalloys under isothermal and thermomechanical fatigue
Sammanfattning : This work concerns the fatigue crack growth behaviour of nickel base single crystal superalloys. The main industrial application of this class of materials is in gas turbine blades, where the ability to withstand severe mechanical loading in combination with high temperatures is required. LÄS MER
