Sökning: "Teknisk fysik med inriktning mot tribomaterial"
Visar resultat 1 - 5 av 18 avhandlingar innehållade orden Teknisk fysik med inriktning mot tribomaterial.
Sammanfattning : In this thesis nanocomposite materials for use in high performance electrical contacts are tested. Self mating silver as coatings on cupper substrates are the most used material combination in power connectors today. In this work two new concepts were tested. LÄS MER
2. Workpiece steels protecting cutting tools from wear : A study of the effects of alloying elements on material transfer and coating damage mechanisms
Sammanfattning : The vision of this thesis is to improve the machinability of workpiece steels. Workpiece material frequently transfers to the cutting tools during machining, and the transfer layers then forming on the tools may give both good and bad effects on machining performance and tool life. LÄS MER
Sammanfattning : Inside the complex machinery of modern heavy-duty engines, the sealing surfaces of the valve and valve seat insert have to endure. Right next to the combustion, temperatures are high and high pressure deforms the components, causing a small relative motion in the interface. LÄS MER
4. Galling of high strength steels and stainless steels in sheet metal forming as evaluated using pin-on-disc testing
Sammanfattning : The thesis focuses on the problem galling in sheet metal forming operations. Galling occurs when sheet metal transfers from the sheet surface onto the tool surface and causes surface damages to following sheets in the forming operation. When this happens the tool must be replaced causing production stops and additional expenses. LÄS MER
5. Microstructural, Mechanical and Tribological Characterisation of CVD and PVD Coatings for Metal Cutting Applications
Sammanfattning : The present thesis focuses on characterisation of microstructure and the resulting mechanical and tribological properties of CVD and PVD coatings used in metal cutting applications. These thin and hard coatings are designed to improve the tribological performance of cutting tools which in metal cutting operations may result in improved cutting performance, lower energy consumption, lower production costs and lower impact on the environment. LÄS MER