Sökning: "compressive strength"

Visar resultat 1 - 5 av 124 avhandlingar innehållade orden compressive strength.

  1. 1. Stabilization-solidification of high water content dredged sediment : Strength, compressibility and durability evaluations

    Författare :Gregory Makusa; Luleå tekniska universitet; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; dredged sediments; stabilization-solidification; unconfined compressive strength; hydraulic conductivity; durability; freeze-thaw cycles; thaw consolidation; thaw weakening; Cone penetration test; shear strength; Geosynthetic clay liners; Silty Till; cement; Fly ash; granulated blast furnace slag; compressibility; settlement; healing potential; cation exchange; stabilization-solidification; dredged sediments; unconfined compressive strength; hydraulic conductivity; durability; Freeze–Thaw cycling; thaw consolidation; thaw weakening; Cone penetration test; shear strength; Geosynthetic clay liners; Silty Till; cement; Fly ash; slag; settlement; compressibility; cation exchange; Civil engineering and architecture - Geoengineering and mining engineering; Materials science - Construction materials; Samhällsbyggnadsteknik och arkitektur; Geoteknik och gruvteknik; Teknisk materialvetenskap - Konstruktionsmaterial; Geoteknik; Soil Mechanics;

    Sammanfattning : Dredging activities at ports and harbors are inevitable for safe navigation of ships and vessels. The outcomes of dredging are huge volumes of dredged materials, which can range from very fine and contaminated sediments to sands and gravels. The coarse sands and gravels can be directly used in civil engineering applications. LÄS MER

  2. 2. Can Bone Void Fillers Carry Load? : Behaviour of Calcium Phosphate Cements Under Different Loading Scenarios

    Författare :Ingrid Ajaxon; Cecilia Persson; Caroline Öhman-Mägi; Uwe Gbureck; Uppsala universitet; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; MEDICAL AND HEALTH SCIENCES; MEDICIN OCH HÄLSOVETENSKAP; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; MEDICIN OCH HÄLSOVETENSKAP; ENGINEERING AND TECHNOLOGY; ENGINEERING AND TECHNOLOGY; MEDICAL AND HEALTH SCIENCES; Calcium phosphate; bone cement; brushite; apatite; monetite; porosity; solvent exchange; degradation; compressive strength; diametral tensile strength; flexural strength; elastic modulus; Poisson’s ratio; fatigue; Teknisk fysik med inriktning mot materialvetenskap; Engineering Science with specialization in Materials Science;

    Sammanfattning : Calcium phosphate cements (CPCs) are used as bone void fillers and as complements to hardware in fracture fixation. The aim of this thesis was to investigate the possibilities and limitations of the CPCs’ mechanical properties, and find out if these ceramic bone cements can carry application-specific loads, alone or as part of a construct. LÄS MER

  3. 3. Time dependent material properties of shotcrete for hard rock tunnelling

    Författare :Lars Elof Bryne; Anders Ansell; Wolfgang Kusterle; KTH; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Shotcrete; rock; granite; bond strength; compressive strength; pullout testing; failure modes; interfacial transition zone; micro structure; ettringite; set accelerator; shrinkage; drains; glass fibres; laboratory testing; tunnels tunnelling;

    Sammanfattning : In this thesis different mechanical properties for shotcrete (sprayed concrete) such as compression strength, bond strength, bending tensile strength, elastic modulus, free and restrained shrinkage as a function of its age was investigated. One of the main issues was to investigate the difference between ordinary cast concrete and shotcrete. LÄS MER

  4. 4. Rock Mechanical Consequences of Refrigeration. A Study Based on a Pilot Scale Rock Cavern

    Författare :Lars-Olof Dahlström; Chalmers University of Technology; []
    Nyckelord :temperature decrease; tensile strength; thermomechanical loading; compressive strength; Poisson s ratio; thermal contraction; rock caverns; rock mass deformation; Young s modulus;

    Sammanfattning : The deformation of a rock mass due to temperature decrease below freezing is very complex, since many factors are involved; thermal strain, strain due to stress change, stress re-distribution, ice formation and the temperature dependency of rock mechanical and thermo-physical properties. The objective of this study was to achieve a better understanding of the rock mass response to thermo-mechanical loading when storing low temperature products in rock caverns excavated in hard crystalline rock masses. LÄS MER

  5. 5. Compressive failure of unidirectional NCF composites

    Författare :Dennis Wilhelmsson; Chalmers University of Technology; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; ENGINEERING AND TECHNOLOGY; Aerospace; Fibre misalignment; Compressive failure; NCF composite;

    Sammanfattning : With more people flying every year, new technologies are needed to reduce our impact on the environment. One option is to reduce the energy used in flight by introducing lighter materials such as carbon fibre reinforced polymers (CFRP). LÄS MER