Sökning: "single-track"

Visar resultat 1 - 5 av 19 avhandlingar innehållade ordet single-track.

  1. 1. Quality on single-track railway lines with passenger traffic : Anlytical model for evaluation of crossing stations and partial double-tracks

    Författare :Olov Lindfeldt; Bo-Lennart Nelldal; Lars-Göran Mattsson; Nils Olsson; KTH; []
    Nyckelord :Railway operation; Railway capacity; single-track; crossing station; partial double-track; TECHNOLOGY; TEKNIKVETENSKAP;

    Sammanfattning : Railway transportation is showing a substantial increase. Investments in new infrastructure, new fast and comfortable vehicles, and high frequency of service are important factors behind the increase.Infrastructure configuration and timetable construction play important roles in the competitiveness of railway transportation. LÄS MER

  3. 2. Railway operation analysis : Evaluation of quality, infrastructure and timetable on single and double-track lines with analytical models and simulation

    Författare :Olov Lindfeldt; Bo-Lennart Nelldal; Lars-Göran Mattsson; Ingo Hansen; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Railway operation; Railway capacity; Single-track; Double-track; Partial double-track; Inter-station distance; Delay; Delay propagation; Crossing; Overtaking; Timetable flexibility; Simulation; Experimental design; Civil engineering and architecture; Samhällsbyggnadsteknik och arkitektur;

    Sammanfattning : This thesis shows the advantages of simple models for analysis of railway operation. It presents two tools for infrastructure and timetable planning. It shows how the infrastructure can be analysed through fictive line designs, how the timetable can be treated as a variable and how delays can be used as performance measures. LÄS MER

  4. 3. Sensor Fusion for Automotive Applications

    Författare :Christian Lundquist; Fredrik Gustafsson; Thomas B. Schön; Uwe Hanebeck; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Kalman filter; PHD filter; extended targets; tracking; sensor fusion; road model; single track model; bicycle model;

    Sammanfattning : Mapping stationary objects and tracking moving targets are essential for many autonomous functions in vehicles. In order to compute the map and track estimates, sensor measurements from radar, laser and camera are used together with the standard proprioceptive sensors present in a car. LÄS MER

  5. 4. Transportation Mission-Based Optimization of Heavy Combination Road Vehicles and Distributed Propulsion, Including Predictive Energy and Motion Control

    Författare :Toheed Ghandriz; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; automation; electrified propulsion; long combination vehicles; electromobility; propulsion system tailoring; automated driving systems; optimal control; single-track and two-track vehicle models; predictive energy management and vehicle stability; motion control; longer heavier vehicles; vehicle stability; optimal energy management; total cost of ownership; optimization; transportation mission; heterogeneous heavy vehicle fleet; fleet sizing;

    Sammanfattning : This thesis proposes methodologies to improve heavy vehicle design by reducing the total cost of ownership and by increasing energy efficiency and safety. Environmental issues, consumers expectations and the growing demand for freight transport have created a competitive environment in providing better transportation solutions. LÄS MER

  7. 5. Electron beam melting of Alloy 718 : Influence of process parameters on the microstructure

    Författare :Paria Karimi Neghlani; Joel Andersson; Per Nylén; Joakim Ålgårdh; Högskolan Väst; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Additive manufacturing; Powder bed fusion; Electron beam melting; Part’s orientation; Microstructure development; Single track; Energy input; Focus offset; Geometrical features; Alloy 718; Manufacturing and materials engineering; Produktions- och materialteknik; Production Technology; Produktionsteknik;

    Sammanfattning : Additive manufacturing (AM) is the name given to the technology of building 3D parts by adding layer-by-layer of materials, including metals, plastics, concrete, etc. Of the different types of AM techniques, electron beam melting (EBM), as a powder bed fusion technology, has been used in this study. LÄS MER