Sökning: "misorientation"

Visar resultat 6 - 10 av 26 avhandlingar innehållade ordet misorientation.

  1. 6. On the low primary water stress corrosion cracking susceptibility of weld deformed Alloy 690

    Författare :Rickard Shen; Pål Efsing; Jonas Faleskog; Grace Burke; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hållfasthetslära; Solid Mechanics; Teknisk materialvetenskap; Materials Science and Engineering;

    Sammanfattning : It has been shown in recent years that the nickel-base Alloy 690 can become susceptible to stress corrosion cracking (SCC) in the primary water of nuclear power plants with pressurized water reactors if it has been sufficiently deformed at room temperature. Although the material is not intentionally used in a deformed state, it can become deformed by various manufacturing processes. LÄS MER

  3. 7. Characterization and Modification of Microstructure in Al-Co-Cr-Fe-Ni Eutectic High-Entropy Alloys

    Författare :Adrianna Lozinko; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; eutectic alloys; solidification; orientation relationship; high-entropy alloys; microstructure; EBSD; recrystallization;

    Sammanfattning : The recently emerging high-entropy alloys (HEAs) present a novel alloying strategy, significantly expanding the scope of metal alloy design. HEAs are defined as alloys consisting of at least four principal elements in equi- or near equiatomic ratios, with a possibility of small amounts of alloying elements. LÄS MER

  4. 8. Microstructure development and mechanical properties of cast and thermo-mechanically treated eutectic high-entropy alloys

    Författare :Adrianna Lozinko; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; strength-ductility trade-off; eutectic alloys; recrystallization; EBSD; heterogeneous structure; high-entropy alloys;

    Sammanfattning : The recently emerging high-entropy alloys (HEAs) present a novel alloying strategy, significantly expanding the scope of metal alloy design. Single-phase HEAs, nevertheless, suffer from the strength-ductility trade off as seen in conventional metallic materials. LÄS MER

  5. 9. Modelling and Characterisation of the Martensite Formation in Low Alloyed Carbon Steels

    Författare :Jessica Gyhlesten Back; Lars-Erik Lindgren; Göran Engberg; Bevis Hutchinson; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Dilatometry; Hardness; EBSD; Martensite; Austenite; Kurdjumov-Sachs; Phase transformation; Modelling; Material Mechanics; Materialmekanik; Steel Forming and Surface Engineering;

    Sammanfattning : The current work contains experimental and theoretical work about the formation of martensite from the austenitic state of the steel Hardox 450. Simulation of rolling and subsequent quenching of martensitic steel plates requires a model that can account for previous deformation, current stresses and the temperature history, therefore dilatometry experiments were performed, with and without deformation. LÄS MER

  7. 10. Magnetic Bicrystal Junctions - a Study of Half-Metallic Manganite Grain Boundaries

    Författare :Robert Gunnarsson; Chalmers tekniska högskola; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES;

    Sammanfattning : This thesis presents studies on magnetic bicrystal junctions. In these, films on either side of the junction are structurally and magnetically misoriented. This type of device enables us to study junction magnetoresistance and spin polarized charge transport between ferromagnets with well defined directions of magnetization. LÄS MER