Sökning: "Dilatometry"

Visar resultat 1 - 5 av 26 avhandlingar innehållade ordet Dilatometry.

  1. 1. Modelling and Characterisation of the Martensite Formation in Low Alloyed Carbon Steels

    Författare :Jessica Gyhlesten Back; Lars-Erik Lindgren; Göran Engberg; Bevis Hutchinson; Luleå tekniska universitet; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Dilatometry; Hardness; EBSD; Martensite; Austenite; Kurdjumov-Sachs; Phase transformation; Modelling; Material Mechanics; Materialmekanik; Steel Forming and Surface Engineering; Stålformning och ytteknik;

    Sammanfattning : The current work contains experimental and theoretical work about the formation of martensite from the austenitic state of the steel Hardox 450. Simulation of rolling and subsequent quenching of martensitic steel plates requires a model that can account for previous deformation, current stresses and the temperature history, therefore dilatometry experiments were performed, with and without deformation. LÄS MER

  2. 2. Sintering of water-atomized iron and low-alloyed steel powder

    Författare :Johan Wendel; Chalmers University of Technology; []
    Nyckelord :surface analysis; dilatometry; water-atomized steel powder; water-atomized iron powder; thermogravimetric analysis; sintering; oxide reduction; reduction kinetics; surface chemistry;

    Sammanfattning : Iron and steel powder grades are extensively used in the powder metallurgy (PM) industry for manufacturing of ferrous structural components, with a major customer in the automotive industry. The powder grades are predominantly manufactured by water-atomization, yielding powder particles with highly irregular morphology and good compressibility, making the powder ideal for the conventional press-and-sinter manufacturing route. LÄS MER

  3. 3. Characteristics and Sintering of Fine Water-atomized and Carbonyl Iron Powder

    Författare :Johan Wendel; Chalmers University of Technology; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; sintering; powder metallurgy; iron powder; dilatometry; surface analysis; thermal analysis;

    Sammanfattning : Various types of iron powder are extensively used in the powder metallurgy (PM) industry. Water-atomized iron powder is commonly used as the base in many low-alloyed steel products manufactured through the conventional 'press and sinter' route, while carbonyl iron powder is often used for metal injection moulded (MIM) components. LÄS MER

  4. 4. Volumetric Analysis in Mechanical Behaviour and Physical Ageing of Polymers

    Författare :Mats Delin; Chalmers University of Technology; []
    Nyckelord :ageing rate; Gr neisen parameter; bulk modulus; KAHR model; dilatometry; Poisson s ratio; timescale; physical ageing; dynamic mechanical properties; stress relaxation; volume changes; creep; Doolittle s equation;

    Sammanfattning : Volumetric changes associated with the deformation of ideal elastic solids depends on elastic constants of the solid and applied strain. Their magnitude is easily determined from the corresponding Poisson's ratios. LÄS MER

  5. 5. Structure and mechanical properties of dual phase steels : An experimental and theoretical analysis

    Författare :Ylva Granbom; John Ågren; Ir Bruno C. De Cooman; KTH; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Dual phase steels; continuous annealing; dilatometry; microstructure; mechanical properties; process parameters; dislocation model; plastic deformation; Metallurgical process and manufacturing engineering; Metallurgisk process- och produktionsteknik; dual phase steels; Mikrostrukturutveckling i avancerade höghållfasta stål;

    Sammanfattning : The key to the understanding of the mechanical behavior of dual phase (DP) steels is to a large extent to be found in the microstructure. The microstructure is in its turn a result of the chemical composition and the process parameters during its production. LÄS MER