Sökning: "Ti alloys"

Visar resultat 21 - 25 av 98 avhandlingar innehållade orden Ti alloys.

  1. 21. Solid metal induced embrittlement of titanium alloys

    Författare :Pia Åkerfeldt; Melina da Silva; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Materialteknik; Engineering Materials;

    Sammanfattning : Titanium alloys were for a time believed to be highly resistant to environmentally assisted cracking because of their ability to form a protective oxide film on the surface. Their resistance can still be considered to be high, but when cracking resistance was originally defined to ensure reliable functionality of fracture-critical components, certain conditions that promote cracking were discovered. LÄS MER

  3. 22. Al-Si Cast Alloys - Microstructure and Mechanical Properties at Ambient and Elevated Temperatures

    Författare :Mohammadreza Zamani; Salem Seifeddine; Anders Jarfors; Franco Bonollo; Jönköping University; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Aluminium cast alloys; eutectic modification; microstructural scale effect; transition metals; room and elevated temperatures tensile properties; physically-based constitutive model.;

    Sammanfattning : Swedish industry is a global leader in development and manufacture of automotive and aviation components where the usage of aluminium products is remarkable. In addition to manufacturing aluminium components, casting enables low-cost and low-emission production of complex geometry components with a range of sizes. LÄS MER

  4. 23. Investigations of the corrosion resistances of magnetron sputtered multicomponent materials : A study on high entropy alloys, high entropy sublattice ceramics, and metallic glasses

    Författare :Aishwarya Srinath; Leif Nyholm; Ulf Jansson; Rebecka Lindblad; Bernard Normand; Uppsala universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; Corrosion resistance; high entropy alloys; magnetron sputtering; thin films; protective coatings;

    Sammanfattning : The corrosion resistances of sputter deposited AlCrNbYZrN, CrNbTiTaWC and TaNiSiC alloys were assessed in acidic and alkaline environments. Compositionally complex alloying strategies, and whether they produced coatings with superior corrosion resistances, were explored. LÄS MER

  5. 24. Microstructure and mechanical properties of Ti-6Al-4V welds produced with different processes

    Författare :Sakari Tolvanen; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; fatigue; welding; porosity; microstructure; defects; Ti-6Al-4V;

    Sammanfattning : Titanium alloys are widely used for components in the fan and compressor sections of aeroengines mainly because of their superior strength-to-weight ratio. Large static compressor components can be manufactured by welding together smaller subcomponents, which has potential to provide benefits such as higher buy-to-fly ratio and improved performance of the components. LÄS MER

  7. 25. Effect of high-pressure cooling on the residual stress in Ti-alloys during machining

    Författare :Manouchehr Vosough; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Manufacturing Systems Engineering; Produktionsutveckling;

    Sammanfattning : Titanium alloys are widely used in aerospace industry but also in other industry sectors. Details for compressors used for generation and petrochemical plants and medical devices can be mentioned as a few examples. Plastic deformation during forming of the metals introduces residual stresses. LÄS MER