Sökning: "magnetron sputtering"
Visar resultat 1 - 5 av 187 avhandlingar innehållade orden magnetron sputtering.
Sammanfattning : Spectrally selective solar absorber using composite Ni-NiO as coating materials was studied. Samples were prepared by dc magnetron sputtering unit named Rulle, which is a miniature copy of an industrial roll-coater unit. LÄS MER
Sammanfattning : In plasma assisted thin film growth, control over the energy and direction of the incoming species is desired. If the growth species are ionized this can be achieved by the use of a substrate bias or a magnetic field. Ions may be accelerated by an applied potential, whereas neutral particles may not. LÄS MER
3. Toward Energy-efficient Physical Vapor Deposition : Routes for Replacing Substrate Heating during Magnetron Sputtering by Employing Metal Ion Irradiation
Sammanfattning : In this Thesis, magnetron sputtering is perfected as an environmental-friendly deposition technique. I performed systematic studies of a novel approach - hybrid high-power impulse and dc magnetron co-sputtering (HiPIMS/DCMS) with metal-ion-synchronized substrate bias pulses. LÄS MER
4. Low-friction and wear-resistant carbon nitride coatings for bearing components grown by magnetron sputtering
Sammanfattning : The scope of this thesis is the investigation of magnetron sputtered carbon nitride coatings suitable for roller bearing components. The research field of tribology of bearings focuses on minimizing friction between components by improving the lubricants. LÄS MER
Sammanfattning : The thin film technology is of great importance in modern society and is a key technology in wide spread applications from electronics and solar cells to hard protective coatings on cutting tools and diffusion barriers in food packaging. This thesis deals with various aspects of thin film processing and the aim of the work is twofold; firstly, to obtain a fundamental understanding of the sputter deposition and the reactive sputter deposition processes, and secondly, to evaluate sputter deposition of specific material systems with low friction properties and to improve their performance. LÄS MER