Sökning: "Shear"

Visar resultat 21 - 25 av 803 avhandlingar innehållade ordet Shear.

  1. 21. Estimating the Air-Water Gas Transfer Velocity during Low Wind Conditions

    Författare :Sam Fredriksson; Göteborgs universitet.; Gothenburg University.; [2016]
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; Air.sea gas exchange; Turbulence; Heat flux; Natural convection; Shear; Direct numerical simulations; Gas transfer velocity; IR; Flux-chambers;

    Sammanfattning : The abundances of atmospheric carbon dioxide, CO2, and methane, CH4, are increasing. These increases affect e.g., the global carbon cycle and the climate both regionally and globally. LÄS MER

  2. 22. Fibre flow mechanisms

    Detta är en avhandling från Stockholm : KTH

    Författare :Roger Bergström; KTH.; [2005]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Fibre flow; floc; shear; compression; fibre network; stress chain; TECHNOLOGY Chemical engineering Chemical process and manufacturing engineering Cellulose and paper engineering; TEKNIKVETENSKAP Kemiteknik Kemisk process- och produktionsteknik Cellulosa- och pappersteknik;

    Sammanfattning : The flow behaviour, and primarily the floc-floc interaction, of pulp paper suspensions have been studied visually. Analogy models based on these observations have been developed as well as the identification of important parameters of floc break-up in low shear rate flow fields. LÄS MER

  3. 23. Composite Bridges Innovative ways of achieving composite action

    Detta är en avhandling från Luleå : Luleå University of Technology

    Författare :Robert Hällmark; Luleå tekniska universitet.; [2018]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Composite action; bridges; steel; concrete; shear connectors; prefabrication; coiled spring pins; shear studs; post-installation; design guidance; Structural Engineering; Konstruktionsteknik;

    Sammanfattning : The topic of this thesis is steel-concrete composite bridges and innovative ways of achieving composite action. The typical superstructure consists of three main components: the steel girders, the concrete deck slab and the shear connectors. LÄS MER

  4. 24. Mechanical Behavior of Tailings Laboratory Tests from a Swedish Tailings Dam

    Detta är en avhandling från Luleå : Luleå University of Technology

    Författare :Riaz Bhanbhro; Luleå tekniska universitet.; [2017]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Tailings dams; Tailings; Mechanical Behavior; Oedometer; Direct Shear; Triaxial; Shear strength; Soil Mechanics; Geoteknik;

    Sammanfattning : Tailings is leftover material from mining industry and is produced in huge quantities approximately 70-99% of the ore production.  Tailings material is stored as impoundments by constructing tailings dams which are often constructed with tailings material itself. LÄS MER

  5. 25. Shear walls with double plasterboards : evalutation of design models

    Detta är en avhandling från Luleå : Luleå tekniska universitet

    Författare :Tomas Filipsson; [2002]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Stålbyggnad; Steel Structures;

    Sammanfattning : This thesis presents a part of the ECSC-project Development of dry composite construction systems based on steel in residential application that focus on design recommendations for stabilizing buildings by using shear resistance in the walls. The existing design method suggested and used by the Swedish plasterboard manufacturer Gyproc AB is considered as a bit conservative and it does not consider double plasterboards properly. LÄS MER