Sökning: "Numerical shear tests"

Visar resultat 11 - 15 av 65 avhandlingar innehållade orden Numerical shear tests.

  1. 11. Peak Shear Strength of Rock Joints – Towards a Methodology for Prediction Based on Field Data

    Författare :Francisco Ríos Bayona; Fredrik Johansson; Diego Mas Ivars; Stefan Larsson; José Muralha; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Rock joints; peak shear strength; DEM; matedness; aperture; Bergssprickor; skjuvhållfasthet; DEM; sprickans passning; sprickvidd; Jord- och bergmekanik; Soil and Rock Mechanics;

    Sammanfattning : The rock joint shear strength at field scale is an important design parameter and remains a challenge for rock mechanics engineers. In Sweden, there exist a large number of concrete dams that are founded on rock masses which in many cases contain sub-horizontal rock joints. LÄS MER

  3. 12. Load Bearing Capacity and Behaviour of Composite Slabs with Profiled Steel Sheet

    Författare :Li An; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; load bearing capacity; composite slabs; shear resistance; concrete;

    Sammanfattning : In many cases the capacity of composite slabs with profiled steel sheeting depends on the shear resistance at the sheet-concrete interface. This shear resistance is essential to the interaction between the steel sheeting and the concrete. Besides this, other factors also affect the behaviour of composite slabs. LÄS MER

  4. 13. A numerical and experimental study of initial defibration of wood

    Författare :Stefan Holmberg; Byggnadsmekanik; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; finite element simulations; fracture; deformation; fibre; defibration; wood; Building construction; Byggnadsteknik;

    Sammanfattning : A major drawback of the defibration or refining process in manufacturing pulp is that of its large energy requirements. If the mechanics of the process were better understood, large amounts of energy could probably be saved. The initial defibration seems to be crucial for both the quality of the pulp and the total consumption of energy. LÄS MER

  5. 14. Fracture mechanics studies of non-yielding materials like concrete : modelling of tensile fracture and applied strength analyses

    Författare :Per-Johan Gustafsson; Institutioner vid LTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; cracking; corners; test-specimens; strength; tension; fracture mechanics; strain localization; size-effect; flexural strength; LEFM; fictitious crack model; Weibull; FEM; pipes; shear strength; concrete; diagonal tension;

    Sammanfattning : Fracture mechanics studies of non-yielding materials are presented. The studies are based on theoretical models for the macroscopical mechanical behaviour of materials during tensile stress induced fracture. A number of applied numercal analysis are indicated. LÄS MER

  7. 15. Developing Computational Methods for Detailed Assessment of Cavitation on Marine Propellers

    Författare :Abolfazl Asnaghi; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; LES; OpenFOAM; Numerical simulation; Hydrodynamics; Cavitation;

    Sammanfattning : Cavitation often brings negative effects, such as performance degradation, noise, vibration, and material damage, to a marine propulsion systems, but for optimum performance, cavitation is almost inevitable. Therefore, it is necessary to improve the understanding of cavitation in order to maximize the performance without encountering severe problems. LÄS MER