Sökning: "Numerical shear tests"
Visar resultat 21 - 25 av 65 avhandlingar innehållade orden Numerical shear tests.
21. Development of the Pressure-Time Method for Flow Rate Measurement in Hydropower Plants by Numerical Simulation
Sammanfattning : Hydropower is a clean and sustainable energy resource developed since the late 19th century. To specify the hydraulic performance characteristics of hydraulic turbines, the volumetric flow rate as one of the few basic quantities should be determined. Discharge represents the most difficult quantity to measure. LÄS MER
22. Parametric FE-modelling of non-linear racking behaviour of light-frame shear walls and modules used for multi-storey timber buildings
Sammanfattning : Wood is a sustainable material from nature that has a longstanding traditionas a building material. Compared to other construction materials, such as steeland concrete, the significance of using structural timber and engineered wood products has increased in recent years because they are regarded as a renewable source and require a low carbon footprint and less energy consumption during production. LÄS MER
23. Internal Erosion Phenomena in Embankment Dams : Throughflow and internal erosion mechanisms
Sammanfattning : In this study, two major internal erosion initiation processes, suffusion and concentrated leak mechanisms, which lead to both defect formation in a dam’s body and its foundation and high throughflow in dams subjected to internal erosion were studied. This understanding has the potential to facilitate numerical modelling and expedite dam safety assessment studies. LÄS MER
24. Rock Mechanical Effects of Cement Grouting in Hard Rock
Sammanfattning : A pre-grouted rock mass is subjected to stress re-distribution as the tunnel excavation progresses. The strength and deformation characteristics of grouted rock joints are therefore of interest in any effort to predict the rock mechanical behavior as well as the failure of sealing in a grouted rock mass. LÄS MER
25. Experiments on sheet metal shearing
Sammanfattning : Within the sheet metal industry, different shear cutting technologies are commonly used in several processing steps, e.g. in cut to length lines, slitting lines, end cropping etc. LÄS MER