Sökning: "Numerical modeling"

Visar resultat 16 - 20 av 569 avhandlingar innehållade orden Numerical modeling.

  1. 16. Numerical Simulation of Some Heat Transfer and Fluid Flow Phenomena for Gas Turbine Blades and a Transonic Turbine Stage

    Författare :Fadil Mumic; Värmeöverföring; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; fluiddynamik; plasma; Thermal engineering; applied thermodynamics; plasmas; Gaser; fluid dynamics; Gases; transonic; numerical; heat transfer coefficient; shroud surface; squealer blade tip; flat blade tip; leakage flow; Termisk teknik; termodynamik; turbulence modeling;

    Sammanfattning : With the attempts to achieve higher thermal efficiency, turbine blades are exposed to very high temperature gases and may undergo severe thermal stress and fatigue. Thus, in order to develop optimal cooling strategies and reduce the heat transfer it is important to obtain a good understanding of both the complex flow field and the heat transfer characteristics in turbine rotor/stator hot-gas passages. LÄS MER

  3. 17. Transonic flow: large eddy simulation, numerical methods and subgrid modeling

    Författare :Christian Wollblad; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; LES; SGS modeling; Transonic flow; semi-implicit numerical scheme; shock wave turbulent boundary layer interaction;

    Sammanfattning : Shock wave turbulent boundary layer interactions (SWTBLI) commonly arise in turbomachinery and aerospace applications and on the exterior of high speed aircrafts. In all these cases, SWTBLI can significantly change the flow and hence the physical load imposed by it. LÄS MER

  4. 18. Modeling Complex Engines as Dynamic Powertrain Members

    Författare :Sixten Berglund; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; vehicle; diesel engine; simulation; supercharging; drivability; toolbox; fuel economy; transient; modeling; turbocharging; control system; powertrain; emissions; performance; dynamic; system;

    Sammanfattning : Engine modeling and simulation have been necessary tools for efficient product development in the automotive industry for some time. The scope of this work is novel engine models, tools, and methods for powertrain research and development. LÄS MER

  5. 19. Numerical modeling of groundwater and air flow between compacted bentonite and fractured crystalline rock

    Författare :Benoît Dessirier; Jerker Jarsjö; Andrew Frampton; Stefan Finsterle; Stockholms universitet; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; Two-phase flow; porous media; fractured media; compacted bentonite; crystalline rock; numerical modeling; geological disposal; Physical Geography; naturgeografi;

    Sammanfattning : The geological repository for final storage of spent nuclear fuel, envisioned by the Swedish Nuclear Fuel and Management Company (SKB), relies on several barriers: copper canisters deposited in holes in the floor of underground tunnels in deep bedrock, embedded in a buffer of compacted bentonite. The initially unsaturated buffer would take up water from the surrounding rock mass and swell to seal any potential gap. LÄS MER

  7. 20. Numerical modeling of air-fiber flows

    Författare :Jelena Andric; Chalmers tekniska högskola; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; aggregation; particle-level simulation; rheology; fiber; dry-forming; fiber suspension;

    Sammanfattning : The dynamics of fiber suspensions are of great importance in applications such as the dry-forming process of pulp mats for use in hygiene products. In this forming process, fibers are transported in flowing air. The fibers interact with the fluid, and may interact with each other and interlock in flocs. LÄS MER