Sökning: "Compacted Graphite Iron CGI"
Visar resultat 11 - 15 av 16 avhandlingar innehållade orden Compacted Graphite Iron CGI.
11. The role of primary austenite morphology in cast iron
Sammanfattning : Automotive industry products portfolio includes a wide variety of complex-shaped cast iron products, such as truck engine components. Urged by strict environmental regulations on emissions, these components constantly need to combine higher demands on performance with lighter designs. LÄS MER
12. A Study On Factor Influencing the Microstructure and Shrinkage Porosity Formation in Compacted Graphite Iron
Sammanfattning : During the last decades, an intensive effort has been dedicated to introduce compacted graphite iron (CGI) for truck engine components as its intermediate graphite morphology provides an increased tensile property compared to lamellar cast iron (LGI) and a better thermal conductivity compared to nodular cast iron (SGI). However, the narrow production technology window in this cast iron grade requires increased technological discipline. LÄS MER
13. Machinability Testing of Materials in Metal Cutting with Focus on Compacted Graphite Iron and Cutting Fluids
Sammanfattning : Due to the stringent demands for lower emission from trucks require better mechanical properties of the material to be used in the engines. Better efficiency necessitates higher peak pressure in the engines and for traditionally used material, Flake Graphite Iron (FGI), the mechanical properties starts to reach the limit of what the material can withstand. LÄS MER
14. The influence of microstructure on mechanical and tribological properties of lamellar and compacted irons in engine applications
Sammanfattning : Lamellar graphite iron (LGI) is commonly used in diesel engine applications such as piston rings–cylinder liner where an excellent combination of physical and tribological properties is essential to avoid scuffing and bore polishing issues. The excellent tribological behaviour of LGI alloys is related to the graphite lamellas, which act as solid lubricant agents by feeding onto the tribosurfaces under sliding conditions. LÄS MER
15. Slag/Metal Metallurgy in Iron and Steel Melts
Sammanfattning : In this work, the metal and slag phase mixing in three steps of a ladle refining operation of steel melts and for an oxygen balance during cooling of cast iron melts have been studied at two Swedish steel plants and at two Swedish cast iron foundries, respectively. In order to predict the oxygen activity in the steel bulk in equilibrium with the top slag as well as in metal droplets in the top slag in equilibrium with the top slag, three slag models were used. LÄS MER