Sökning: "Torque"

Visar resultat 1 - 5 av 381 avhandlingar innehållade ordet Torque.

1. 1. Torque and Angle Controlled Tightening of Bolted Joints

   Författare :Göran Toth; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; torque controlled tightening; deformation parameters; momentary elongation; deformation factor; torque; Bolted screwed joints; spring characteristic; Torx; torque and angle controlled tightening; hexalobular; final torque; snug torque; Taylor’s series expansions; preload; plastic deformation; permanent elongation; yield; friction diameter; plastic spring constant; clevis; turn-of-nut method; bearing surface pressure; twisting; Monte-Carlo simulations;

   Sammanfattning : Reduced weight and fuel consumption, improved reliability and engine performance are the main requirements in the automotive industry of today. These requirements demand robust and optimized bolted joints, where a high amount of preload obtained by effective utilisation of the bolt is essential. LÄS MER

3. 2. Torque and angle controlled tightening over the yield point of a screw

   Författare :Göran Toth; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; clevis; permanent elongation factor; Monte-Carlo simulations; bolted screwed joints; final preload; torque and angle controlled tightening; extreme-value method; plastic deformation; Taylor s series expansions; plastic spring constant of the screw; yield; elastic angle; momentary elongation factor; snug torque; torque controlled tightening; final torque; turn-of-nut method;

   Sammanfattning : .... LÄS MER

4. 3. Synchronous Reluctance Machine (SynRM) in Variable Speed Drives (VSD) Applications

   Författare :Reza Rajabi Moghaddam; Chandur Sadarangani; Alfredo Vagati; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Synchronous Reluctance Machine SynRM ; Torque; Torque Ripple; Design; Optimization; FEM; Control; Standard Size; Measurement; Performance Comparison; Induction Machine IM ; Interior Permanent Magnet Machine IPM ; Variable Speed Drive VSD ; General Purpose GP ; Field Oriented Control FOC ; Direct Torque Control DTC ; Heat Run; Test; Thermal; Operation Diagram; Circle Diagram; Electrical engineering; Elektroteknik;

   Sammanfattning : This thesis is comprehensively dedicated to the theoretical and experimental reevaluation of the Synchronous Reluctance Machine (SynRM). A simple approach to derive the SynRM main characteristics and behavior is followed. An introduction to an evaluation of the different control strategies in is given. LÄS MER

5. 4. Hydropower generator and power system interaction

   Författare :Johan Bladh; Urban Lundin; Rafael Escarela-Perez; Uppsala universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Amortisseur windings; applied voltage test; automatic voltage regulators; damper windings; damping torque; empirical modelling; equivalent circuits; excitation control; finite element method; hydropower generators; power system restoration; power system stability; synchronous machines; self excitation; shaft torque amplification; short circuit test; single machine infinite bus; slip test; standstill frequency response test; subsynchronous oscillations; synchronising torque; synchronous generators; torsional interaction.; Engineering Science with specialization in Science of Electricity; Teknisk fysik med inriktning mot elektricitetslära;

   Sammanfattning : After decades of routine operation, the hydropower industry faces new challenges. Large-scale integration of other renewable sources of generation in the power system accentuates the role of hydropower as a regulating resource. LÄS MER

7. 5. Fabrication and Characterization of Nanocontact Spin-Torque Oscillators

   Författare :Sohrab Redjai Sani; Johan Åkerman; Brad Engel; KTH; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Spin-torque oscillators; phase locking; spin wave; giant magnetoresistance; spin transfer torque; thin films.;

   Sammanfattning : The manufacturing of nanocontact-based spin-torque oscillators (NC-STOs)has opened the door for spintronic devices to play a part as active microwaveelements. The NC-STO has the capability of converting a direct current intoa microwave signal, and vice versa, by utilizing the spin transfer torque (STT)in ferromagnetic multilayer systems. LÄS MER