Sökning: "Arne Dahle"

Hittade 5 avhandlingar innehållade orden Arne Dahle.

1. 1. On the influence of imperfections on microstructure and properties of recycled Al-Si casting alloys

   Författare :Anton Bjurenstedt; Salem Seifeddine; Anders E.W. Jarfors; Arne Dahle; Johan Moverare; Jönköping University; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Imperfections; Recycled Al-Si alloys; Fe-rich intermetallics; Melt quality; Fractography; Defekter; Återvunna Al-Si legeringar; Fe-rika intermetaller; Smältakvalité; Fraktografi;

   Sammanfattning : There are great energy savings to be made by recycling aluminium; as little as 5% of the energy needed for primary aluminium production may be required. Striving to produce high quality aluminium castings requires knowledge of microstructural imperfections, which is extra important when casting recycled aluminium that generally contains higher levels of imperfections compared to primary aluminium. LÄS MER

3. 2. The role of primary austenite morphology in cast iron

   Författare :Juan Carlos Hernando; Attila Diószegi; Arne Dahle; Jessica Elfsberg; Roberto Boeri; Jönköping University; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Solidification; Cast Iron; Primary Austenite; Microstructure Evolution; Coarsening; LGI; CGI; SGI; UTS; stelning; gjutjärn; primär austenit; mikrostrukturbildning; förgrovning; LGI; CGI; SGI; UTS;

   Sammanfattning : Automotive industry products portfolio includes a wide variety of complex-shaped cast iron products, such as truck engine components. Urged by strict environmental regulations on emissions, these components constantly need to combine higher demands on performance with lighter designs. LÄS MER

4. 3. Problems in the Aluminium DC Casting Process Associated with Melt Treatment Operations

   Författare :Ghadir Razaz; Torbjörn Carlberg; Arne.K Dahle; Mittuniversitetet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

   Sammanfattning : The quality of DC cast Al alloys is highly dependent on melt batch composition and impurity level in the molten alloy. The chemical composition and cleanliness of a melt is controlled through the melt treatment operations, carried out while the melt is still in the furnace before casting starts. LÄS MER

5. 4. Semi-solid Al-7Si-Mg castings – Microstructure and mechanical properties

   Författare :Jorge Santos; Anders E.W. Jarfors; Arne Dahle; Hongbiao Dong; Jönköping University; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Rheometal™ process; semi-solid casting; aluminium alloys; dissolution; grain refinement; segregation; intermetallic phases; heat treatment; mechanical properties; fatigue properties; Rheometal™ processen; semi-solid gjutgarna; aluminiumlegeringar; upplösning; kornförfining; segregering; intermetalliska faser; värmebehandling; mekaniska egenskaper; utmattningsegenskaper;

   Sammanfattning : The use of lightweight parts by the vehicle industry produces immediate benefits on the reduction of emissions because less energy is consumed during the production, service, and recycle stages of a product life cycle. Therefore, the development of processes that allow high design freedom for topology optimisation and materials with high specific strength is a great need. LÄS MER

7. 5. Mechanical properties of semi-solid Al castings : Role of stirring

   Författare :Qing Zhang; Anders E.W. Jarfors; Stefan Jonsson; Tomas Liljenfors; Arne K. Dahle; Johan Ahlström; Jönköping University; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Rheometal™ process; aluminum alloys; stirring; segregation; porosity; oxides; ductility; fatigue performance; melt quality;

   Sammanfattning : Aluminum castings have been widely used in the automotive industry to reduce the vehicle's weight. However, the existence of casting defects significantly limits its application. The most common and detrimental defects in aluminum castings are porosity and oxides. LÄS MER