Sökning: "microstructure modelling"

Visar resultat 1 - 5 av 118 avhandlingar innehållade orden microstructure modelling.

  1. 1. Study of precipitation in martensitic Fe-C-Cr alloys during tempering : Experiments and modelling

    Författare :Ziyong Hou; Joakim Odqvist; Andersson Jörgen; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Fe-C-Cr alloy; Microstructure; Precipitates; Tempering of martensite; Electron microscopy; Modelling.; Teknisk materialvetenskap; Materials Science and Engineering;

    Sammanfattning : Understanding the precipitation reaction is very important since precipitation hardening is one of the most effective strengthening mechanisms in metallic alloys. In martensitic steels, a tempering heat treatment is often performed. LÄS MER

  3. 2. Design of Microstructures in Thermal Barrier Coatings : A Modelling Approach

    Författare :Mohit Kumar Gupta; Per Nylén; Robert Vaβen; Högskolan Väst; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; thermal barrier coatings; microstructure; thermal conductivity; Young‘s modulus; lifetime; finite element modelling; design; Manufacturing and materials engineering; Produktions- och materialteknik;

    Sammanfattning : Plasma sprayed Thermal Barrier Coating systems (TBCs) are commonly used for thermal protection of components in modern gas turbine application such as power generation, marine and aero engines. The material that is most commonly used in these applications is Yttria Stabilized Zirconia (YSZ) because of this ceramic’s favourable properties, such as low thermal conductivity, phase stability to high temperature, and good erosion resistance. LÄS MER

  4. 3. Design of Thermal Barrier Coatings : A modelling approach

    Författare :Mohit Kumar Gupta; Per Nylén; Nicolaie Markocsan; Christer Persson; Lech Pawlowski; Högskolan Väst; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Thermal barrier coatings; Microstructure; Thermal conductivity; Young’s modulus; Interface roughness; Thermally grown oxide; Lifetime; Finite element modelling; Design; Manufacturing and materials engineering; Produktions- och materialteknik;

    Sammanfattning : Atmospheric plasma sprayed (APS) thermal barrier coatings (TBCs) are commonly used for thermal protection of components in modern gas turbine application such as power generation, marine and aero engines. TBC is a duplex material system consisting of an insulating ceramic topcoat layer and an intermetallic bondcoat layer. LÄS MER

  5. 4. High Performance Manufacture of Sintered Steel – Critical Aspects of Tooling Performance and Sintered Microstructure

    Författare :Sepehr Hatami; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Tool Steels; Chromium Alloyed Steel; Modelling; Process Selection; Sinter-Hardening; Atmosphere; Microstructure; Galling; Pressing Dies; Wear;

    Sammanfattning : Steel is the dominant material for the production of structural parts. By means of powder metallurgy (PM) processing, manufacturers have been able to manufacture steel parts with appreciable dimensional accuracy and desirable mechanical properties. LÄS MER

  7. 5. Modelling microstructure evolution of weld deposited Ti-6Al-4V

    Författare :Corinne Charles; Högskolan Väst; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; metal deposition; Ti-6Al-4V; microstructure modelling; titanium alloy; Finite Element Method; Johnson-Mehl-Avrami; RTMwD; Materials science; Teknisk materialvetenskap; Manufacturing and materials engineering; Produktions- och materialteknik; Material Mechanics;

    Sammanfattning : The microstructure and consequently the mechanical properties of titanium alloys are highly dependent on the temperature history endured by the material. The manufacturing process of metal deposition induces repetitive cooling and heating in the material determining a specific microstructure. LÄS MER