Sökning: "metal coated steel sheet"
Visar resultat 1 - 5 av 7 avhandlingar innehållade orden metal coated steel sheet.
1. Surface Engineering in Sheet Metal Forming
Sammanfattning : In recent years, surface engineering techniques have been developed in order to improve the tribological performance in many industrial applications. In sheet metal forming processes, the usage of liquid lubricants can be decreased by using self lubricated tribo surfaces which will result in more environmentally friendly workshops. LÄS MER
2. Tribology of stamping : the influence of designed steel sheet surface topography on friction
Sammanfattning : Tribology is the science of friction, wear, and lubrication; the interaction of surfaces in relative motion. The tribological conditions in sheet metal forming influences the flow of material in forming operations, the strain distributions of sheet material, extent of wear, and thereby the quality of products. LÄS MER
3. The Positive Effect of Nitrogen Alloying of Tool Steels Used in Sheet Metal Forming
Sammanfattning : Sheet metal forming processes are mechanical processes, designed to make products from metal sheet without material removal. These processes are applied extensively by the manufacturing industry to produce commodities such as heat exchangers or panels for automotive applications. They are suitable for production in large volumes. LÄS MER
4. Galling of high strength steels and stainless steels in sheet metal forming as evaluated using pin-on-disc testing
Sammanfattning : The thesis focuses on the problem galling in sheet metal forming operations. Galling occurs when sheet metal transfers from the sheet surface onto the tool surface and causes surface damages to following sheets in the forming operation. When this happens the tool must be replaced causing production stops and additional expenses. LÄS MER
5. Hot forming tribology : galling of tools and associated problems
Sammanfattning : In recent years, the use of ultra high-strength steels (UHSS) as structural reinforcements and in energy-absorbing systems in automobiles has increased rapidly; mainly in view of their favourable strength to weight ratios. However, due to their high strength, the formability of UHSS is poor, thus complex-shaped UHSS components are invariably produced through hot-metal forming processes. LÄS MER