Sökning: "eutectic cell size"

Hittade 4 avhandlingar innehållade orden eutectic cell size.

  1. 1. The mechanisms of metal expansion penetration during solidification of grey cast iron

    Författare :Izudin Dugic; Preben Norgaard Hansén; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Grey cast iron; solidification; solidification modelling; graphite expansion; molar volume; casting simulation; thermal analysis; thermoanalysis cup; casting temperature; inoculation; inoculant; metal expansion penetration; eutectic cell size; primary austenite; austenite grain; TECHNOLOGY; TEKNIKVETENSKAP;

    Sammanfattning : The production of high quality castings requires the casting surface to be clean and free from defects. One type of defect often found is caused by metal penetration into the sand mould. LÄS MER

  3. 2. Metal Expansion Penetration During Solidification of Grey Cast Iron

    Författare :Izudin Dugic; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Grey cast iron; solidification; solidification modelling; graphite expansion; molar volume; casting simulation; thennal analysis; thermoanalysis cup; casting temperature; inoculation; inoculant; meta! expansion penetration; eutectic cell size.; TECHNOLOGY; TEKNIKVETENSKAP;

    Sammanfattning : The meta! expansion penetration has been examined experimentally. The whole casting process was simulated using a commercial software, in order to investigate the solidification characteristics and the pore formation in the casting studied. LÄS MER

  4. 3. Coil Design for a Mirror Based Fusion-Fission Reactor

    Författare :Anders Hagnestål; Uppsala universitet; []
    Nyckelord :TECHNOLOGY; TEKNIKVETENSKAP;

    Sammanfattning : The SFLM Hybrid project aims to show that it is probable that a fusion-fission reactor can be constructed with a single-cell minimum B mirror machine as a neutron source. In this licentiate thesis, theoretical work has been done with the magnetic coil system of such a device and also with the overall concept. LÄS MER

  5. 4. Factors Influencing the Formation of Shrinkage Porosity in Grey Cast Iron

    Författare :Lennart Elmquist; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; CET; Oxygen; Columnar zone; Grey iron; Shrinkage porosity; Equiaxed zone; Solidification; DAAS; Hydrogen; Primary austenite;

    Sammanfattning : The presence of shrinkage defects is of major concern in the production of grey iron castings. This type of defect can penetrate through the casting as a three-dimensional network. LÄS MER